Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Hubs

All-City New Sheriff SL Hubs
$99.99 - $109.99
New Sheriff hubs are the ultimate in track racing hubs. They minimize weight with larger cutouts in the flanges, lightened axles, shorter bolts, and slimmer end caps than previous versions. The result is a hubset that weighs a mere 432g, 198g for the front, and 234g for the rear. This makes it one of the lightest track hubsets in the world, a figure even more impressive when you consider that All-City didn't eliminate the usefulness of a fixed / fixed or fixed / free option as most racing hubs do. They feature the finest Japanese manufactured 6902 bearings which roll incredibly fast and smooth while retaining excellent seals for all weather, all-day everyday durability. Front hub specs: - Weight: 198g - Torque Spec: 33nm (25ft lbs.) - Non-Drive Side Center to Flange: 34mm - Drive Side Center to Flange: 34mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm Rear hub specs: - Weight: 234g - Torque Spec: 33nm (25ft.lbs.) - Non-Drive Side Center to Flange: 29mm - Drive Side Center to Flange: 29mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30 Hubs)
$80.00
This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
Stan's NoTubes 3.30/3.30Ti Rear Hub End Caps for XD Driver
$17.50
Replacement end caps for Stan's NoTubes rear hubs with XD Driver.
Hope Fatsno 15x142mm Front Conversion Kit
$29.21
15x142mm conversion kit for Hope Fatsno front hubs.
All-City Go-Devil Rear
$120.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced. Rim brake hubs include quick release end caps and skewer. On all models we spec high-quality made in Japan stainless-steel sealed bearings. Freehub bodies have 28 points of engagement. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity. - Weight: 227g - Drive Side Center To Flange 16.25mm - Non Drive Center To Flange 36.25mm - Non Drive Flange Diameter 41mm - Drive Side Flange Diameter 49mm
SRAM Predictive Steering Hub
$250.00
SRAM's Predictive Steering Hub is a dedicated hub interface for the inverted RockShox RS-1 fork. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions and the oversize, solid-aluminum Torque Tube axle delivers extreme strength and stiffness. It's equipped with standard 6-bolt rotor mounts and is not convertible to other axles.
Shimano Dura-Ace Track Hi-Flange Rear Hub
$186.99
Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading.
All-City Standard Rear Track Hub
$66.00
• Aluminum hub body with hollow steel axle • Fixed/Free • Sealed bearings • 120mm or 130mm rear spacing • 32 hole • 282 grams
Chris King R45 Rear
$451.00
When we set out to design our R45 hub we had over 30 years of bearing experience and 20 years of building hubs under our belts. The R45 is the culmination of that experience; we focused on creating a lightweight road racing hub that utilized hallmarks of Chris King components: precision, performance, and quality. Our R45 rear hub combines a redesigned RingDrive system with 45 teeth for lower drag and near instant engagement with a lightweight hub body and our legendary made-in-house bearings. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. The patented Chris King RingDrive with 45-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our R45 Hub Service Tool
Surly Ultra New Rear Hub (120mm)
$70.00
Track stars and fixed-gear converts love Surly's Ultra New Track Rear Hub! This gorgeous hunk of aluminum boasts reliable sealed bearings, and your choice of fixed/fixed or fixed/free gearing. Plus, this hub's 120mm width fits most track frames and the flex-free solid axle is forged from rugged chromoly.
Chris King R45D Centerlock Front
$264.00
R45 Centerlock hubs combine a lightweight hub body, our legendary made-in-house bearings, and now Centerlock compatibility to harness the power of disc brakes. The result is the increased power and modulation of disc brakes, the fast, smooth rolling speed of our bearings, and the rail steering from our one piece solid axles. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - Legendary made-in-house bearings - 5-year built-to-last warranty - Easily convertible axles 100mm x 9mm QR or 100mm x 12mm thru axle front options. - Easily serviceable and completely re-buildable with our R45 Hub Service Tool
Stan's NoTubes 3.30/3.30Ti Hub Kit
$15.00 - $20.00
Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm.
Campagnolo Hub Rebuild/Upgrade Kit
$89.98 - $167.93
- USB and Cult ceramic renewing kits can be used to upgrade Campagnolo wheels that come stock with stainless steel bearings - Kit includes (2) each of dust seals, hub cones, hub cups, and ceramic or steel ball bearings
Shimano SLX M7100 Front Hub
$43.99
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-free 15mm thru axle system is stiff and lightweight - Simple setup and reliable trail performance
SRAM 900 Rear Hub
$209.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Fully convertible with tool-free end caps - BOOST variants - 24, 28 or 32 spoke holes
DT Swiss 350s Straightpull MTB Center Lock Front Hub
$76.90
DT Swiss' 350s Straightpull Center Lock hub hits the sweet spot between low weight and reliability. The straight pull spoke design makes for a stiff, responsive mountain bike wheel that will roll for thousands of nearly frictionless miles.
Race Face Vault Front Hub
$174.99
- An oversized hub shell increases torsional and lateral stiffness - 6902 bearings for maximum durability - Wide bearing placement was designed to decrease load on the bearings - Low-drag labyrinth seals - Tool-free endcaps - Torque-cap compatible - Includes standard 15mm end-caps only, Torque must be purchased separately
Race Face Vault Rear Hub
$324.99
The super fast engagement of Vault, now available for your custom wheel builds. Available in Boost and non-Boost and Shimano or XD cassette bodies. An oversized hub shell increases torsional and lateral stiffness, while proven 6902 bearings were selected due to their large ball diameter and durability. A 60-tooth drive ring alternately engages six double tooth pawls, giving you 3-deg engagement for near-instant power transfer. Wide bearing placement was designed to decrease load on the bearings, improving lifespan. Protecting the internals are low-drag labyrinth seals designed specifically for the Vault hubs. Finish it off with tool-free endcap swaps and you have a hub that not only moves faster but adapts faster.
Surly Ultra New Disc Front Hub
$85.00
Surly's Ultra New Disc Front Hub is a gorgeous hunk of aluminum that boasts reliable sealed bearings and a 6-bolt disc attachment. The forged chromoly axle is flex-free for steering precision, long-lasting durability and simple quick-release compatibility.
Chris King R45D Centerlock Rear
$482.00
R45 Centerlock hubs combine a lightweight hub body, our legendary made-in-house bearings, and now Centerlock compatibility to harness the power of disc brakes. The result is the increased power and modulation of disc brakes, the fast, smooth rolling speed of our bearings, and the rail steering from our one piece solid axles. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. Product Benefits - Engineered, manufactured and assembled in Portland, Oregon USA - Legendary made-in-house bearings - 5-year built-to-last warranty - Patented RingDrive system with 45 simultaneously engaged points of contact for virtually drag free engagement - Easily convertible axles 100mm x 9mm QR or 100mm x 12mm thru axle front options. 135mm x 10mm QR or 142mm x 12mm thru axle rear - Easily serviceable and completely re-buildable with our R45 Hub Service Tool - Ceramic bearing upgrade available - Lockring is sold separately (PHB355) and is required for rotor installation on rear hub
DT Swiss 350 MTB Center Lock Front Hub
$81.00
DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these Center Lock disc hubs make rotor installation and removal super fast.
SRAM 900 Front Hub
$83.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes
DT Swiss 350 Road Front Hub
$79.20
The 350 road hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these hubs will roll for thousands of nearly frictionless miles.
DT Swiss 350 MTB 6-Bolt Rear Hub
$230.00 - $252.90
DT's 350 MTB rear hub offers top-end performance for all your riding needs. DT Swiss' Ratchet freewheel system provides precise engagement, high load capacity, and reliability. The Ratchet System driver is extremely durable and can be easily serviced—without tools—in minutes thanks to it's press fit assembly. The press fit assembly also allows the hub to work with a wide array of axle configurations; by simply swapping out the tool-free end caps (sold separately), you'll be able to enjoy the legendary DT Swiss quality on almost any bike. • Accepts 6-bolt rotors
Chris King R45 Front
$230.00
The R45 front hub is built to address our road and cross riders’ demands for Chris King performance in a lighter weight and more aerodynamic package. Defined by a narrow hub body and low flanges the R45 front hub is a sleek base for the fastest wheels. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our R45 Hub Service Tool
DT Swiss 350 MTB 6-Bolt Front Hub
$80.00
DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these 6-bolt disc hubs will roll for thousands of nearly frictionless miles.
SRAM 506 Front Hub
$30.00
SRAM's 506 hub borrows technology from its more expensive brethren to bring you a solid hub at a great price. An aluminum hubshell with hi/lo flanges provide no-nonsense durability and even spoke tension. Dependable cup and cone bearings with polished races roll smooth for the long haul and a strong, steel quick-release axle holds up under pressure.
Shimano Dura-Ace Track HB-7710 Low-Flange Rear Hub
$153.99
- Aluminum Hub Shell - Super polished Bearing Races - Over Locknut: 120mm - Stainless Steel Ball Bearings - Contact Sealing: Dust Cap - Average Weight: 298g (w/o lockring)
Shimano Dura-Ace Track HB-7710 Low-Flange Front Hub
$130.99
- Aluminum Hub Shell - Over Locknut: 100mm - Stainless Steel Ball Bearings - Spoke Hole Circle: 38mm - Center to Flange (Right): 37mm - Center to Flange (Left): 37mm - Average Weight: 203g
Shimano Deore XT M8100 Straight Pull Front Hub
$67.99
With simple setup and reliable trail performance, the Shimano Deore XT front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with spline mount and lock ring - Toolless 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance - Hole Count: 28
Page 1 of 3 Next page