Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Hubs

DT Swiss 350 MTB 6-Bolt Front Hub
$80.00
DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these 6-bolt disc hubs will roll for thousands of nearly frictionless miles.
Stan's NoTubes 3.30/3.30Ti Rear Hub End Caps for XD Driver
$17.50
Replacement end caps for Stan's NoTubes rear hubs with XD Driver.
Shimano SLX M7100 Front Hub
$43.99
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-free 15mm thru axle system is stiff and lightweight - Simple setup and reliable trail performance
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30 Hubs)
$80.00
This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
Stan's NoTubes 3.30/3.30Ti Hub Kit
$15.00 - $20.00
Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm.
Shimano Deore 6-Bolt Disc Brake Front Hub
$27.99
The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts. - Double contact sealing - Super polished bearing races for low friction rolling - 6-bolt ISO disc mounting surface
Shimano Deore XT M756 6-Bolt Disc Front Hub
$38.99
Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface
Hope Pro 2 & Pro 2 Evo 20mm Through Axle Front Hub End Caps
$32.29
Hope Front Axle Conversion Kits · Compatible with Pro 2 and Pro 2 Evo hubs · Converts all Hope Pro 2 and Pro 2 Evo front hubs to 20mm through axle hubs
WeThePeople Supreme Front Hubs
$80.99 - $83.99
The partner in crime to WeThePeople's Supreme Rear Cassette Hub, the matching Supreme Front Hub uses high-quality Japanese sealed bearings and a beefy, heat-treated 4130 chromoly axle held on with 10mm female bolts. Match it up with WTP nylon fiberglass Supreme front hub guards and you have a dialed front-end setup. - 14mm hollow/hardened heat treated chromoly axle - 10mm female bolts
Race Face Vault Rear Hub
$324.99
The super fast engagement of Vault, now available for your custom wheel builds. Available in Boost and non-Boost and Shimano or XD cassette bodies. An oversized hub shell increases torsional and lateral stiffness, while proven 6902 bearings were selected due to their large ball diameter and durability. A 60-tooth drive ring alternately engages six double tooth pawls, giving you 3-deg engagement for near-instant power transfer. Wide bearing placement was designed to decrease load on the bearings, improving lifespan. Protecting the internals are low-drag labyrinth seals designed specifically for the Vault hubs. Finish it off with tool-free endcap swaps and you have a hub that not only moves faster but adapts faster.
Campagnolo Hub Rebuild/Upgrade Kit
$89.98 - $167.93
- USB and Cult ceramic renewing kits can be used to upgrade Campagnolo wheels that come stock with stainless steel bearings - Kit includes (2) each of dust seals, hub cones, hub cups, and ceramic or steel ball bearings
Chris King R45 Front
$230.00
The R45 front hub is built to address our road and cross riders’ demands for Chris King performance in a lighter weight and more aerodynamic package. Defined by a narrow hub body and low flanges the R45 front hub is a sleek base for the fastest wheels. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our R45 Hub Service Tool
Chris King ISO B Rear Hub
$460.00 - $504.00
Chris King ISO B 148x12 rear hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, ISO B hubs have heavy-duty bearing seals, and a threaded driveshell seal ring. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use.?? The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound. - Engineered, manufactured and assembled in Portland, Oregon USA - Updated hub shell shape with canted flanges for stronger wheel builds - 5-year built-to-last warranty - Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our Chris King Hub Service Tool - Responsibly lightweight - Specifically designed for "BOOST" 148mm x 12mm axle standard - Drilling: 32h
Odyssey Antigram Rear Hub
$179.99
The Antigram is a 36-H rear hub that is strong, light and reasonably priced with in-bound axle bolts that is both RHD/LHD switchable and guard compatible. SPECS - 2014-T6 forged aluminum hub shell - 6903RS sealed cartridge ball bearings - 9-T driver with 3-Pawn independent springs design and precision caged needle bearings - RHD/LHD switchable WEIGHTS - With 14mm Chromoly Axle: 14.5oz / 411g - MEASUREMENTS Drive Side - Effective Flange Diameter: 49mm - Non-Drive Side Effective Flange Diameter: 49mm - Drive Side Flange to Center Distance: 30mm - Non-Drive Side Flange to Center Distance: 30mm
SRAM 900 Front Hub
$83.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes
Shimano Dura-Ace Track Hi-Flange Front Hub
$168.99
Shimano's Dura-Ace Track Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed.
Shimano ZEE Front Hub
$56.99
Shimano's ZEE Front Hub starts you off on the right foot when building a stout DH-worthy wheel. It uses a 20mm through-axle and Shimano's Center Lock rotor mount. Aggressive riding punishes lesser gear, so the ZEE hub sports sealed, adjustable angular-contact bearings for season after season durability.
Sturmey-Archer 8-Speed Drum Brake Rear Hub
$160.97
- Internal gear 8-speed hub with 70mm drum brake - Rotary gear selection with no protruding indicator chain or switch box - Direct drive in first gear allows use of smaller chainwheels - A356 aluminum hub shell with 13/32" slotted solid axle (185mm overall axle length) - Gear ratio range of 325% - Includes 3-spline 23 tooth cog and a TSS86 twist shifter. Brake lever sold separately
DT Swiss 240s MTB 6-Bolt Rear Hub
$426.90 - $454.90
The DT Swiss 240s 6-Bolt Rear Hub hits the sweet spot between low weight and reliability. With multiple axle options, you can build up a high-end wheel for nearly any bike. DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.
Hope Fatsno 15mm Front Conversion Kit
$29.21
15mm thru-axle conversion kit for Hope Fatsno front hubs.
Shimano XTR M9100 Front Hub
$179.99
Built with labyrinth and contact seals to remain silky smooth in dusty, muddy, wet, and sandy conditions, and with highly refined cup and cone surfaces, the XTR front hub is perfect for custom MTB wheel builds. - Traditional flange
Shimano Metrea Dynamo 3.0W Center Lock Disc Front Hub
$152.99
The DH-UR700-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch quick-release wheels. - New internal unit construction is 28g lighter than DH-T8000-3D - More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000 - Angular contact bearings - Compact & lightweight - Low rotational resistance - Durable sealing performance
Shimano Deore HB-T610 Rim Brake Front Hub
$18.99
Made for trekking bikes with rim brakes, the SHIMANO DEORE T610 front hub offers durable and reliable performance thanks to its high-quality sealing and angular contact bearings. - Double contact sealing - Super polished bearing races for low-friction rolling
Hope Fatsno QR Front Conversion Kit
$29.21
Quick-release conversion kit for Hope Fatsno front hubs.
Shimano Deore XT M8000 Centerlock Disc Front Hub
$38.99
Shimano XT FH-M8000/8010 Front Hubs - All-weather durability, reliable performance and lighter weight - Cone races ground by a Cubic Boron Nitride tool for smooth rolling durability - Center Lock disc brakes provide reliable braking power - Rotor lockring not included - Series: Deore XT - Disc Rotor Mount: Center Lock Disc - Axle Type: QR - Axle Length: 100mm - Axle Diameter: 14mm - Contact Sealing: Labyrinth and Contact - Spoke Holes: 32H - Center to Flange (Right): 41mm - Center to Flange (Left): 44mm
DT Swiss 240s Straightpull Road Rear Hub
$448.80
The DT Swiss 240s Straightpull road hub hits the sweet spot between low weight and reliability. The straight pull spoke design makes for a stiff, responsive 11-speed Shimano-compatible wheel that will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. Lace it up and hit the road.
DT Swiss 240s Straightpull MTB 6-Bolt Rear Hub
$470.00
Ready for everything from XC racing to enduro charging, the DT Swiss 240s Straightpull Center Lock hub hits the sweet spot between low weight and reliability. The straight pull spoke design makes for a stiff, responsive mountain bike wheel that will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals.
Paul Component Engineering Disc WORD Rear Hub
$182.00
- Adjustable double sealed cartridge bearings and labyrinth seals - Wide canted flanges build a no dish wheel - Large 8mm bolts and knurled washer face for maximum hold - Accepts 24tpi BMX freewheels. 300g - 32-hole - Made in USA
Hope Pro 2 & Pro 2 Evo 15mm Thru Axle Conversion Caps
$29.21
Hope Front Axle Conversion Kits · Compatible with Pro 2 and Pro 2 Evo hubs · Converts all Hope Pro 2 and Pro 2 Evo hubs to 15mm through axle hubs
All-City Go-Devil Rear Disc
$175.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. The splined freehubs have 28 points of engagement, the XD driver has 56. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity. - Weight: 277g - Includes 12mm thru-axle end caps and quick release skewer - Drive Side Center To Flange 18.5mm - Non-Drive Center to Flange 34mm - Non-Drive Flange Diameter 58mm - Drive Side Flange Diameter 49mm