$99.99 - $109.99
New Sheriff hubs are the ultimate in track racing hubs. They minimize weight with larger cutouts in the flanges, lightened axles, shorter bolts, and slimmer end caps than previous versions. The result is a hubset that weighs a mere 432g, 198g for the front, and 234g for the rear. This makes it one of the lightest track hubsets in the world, a figure even more impressive when you consider that All-City didn't eliminate the usefulness of a fixed / fixed or fixed / free option as most racing hubs do. They feature the finest Japanese manufactured 6902 bearings which roll incredibly fast and smooth while retaining excellent seals for all weather, all-day everyday durability. Front hub specs: - Weight: 198g - Torque Spec: 33nm (25ft lbs.) - Non-Drive Side Center to Flange: 34mm - Drive Side Center to Flange: 34mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm Rear hub specs: - Weight: 234g - Torque Spec: 33nm (25ft.lbs.) - Non-Drive Side Center to Flange: 29mm - Drive Side Center to Flange: 29mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm
Whisky's No.9 50d rims are designed to a be a lightweight, aero, stable starting point to build exquisite wheels. They offer an aero advantage over the 30d rims, while offering a stiffer, more robust platform. Fit for long days in the saddle, cutting through the wind and hammering finish line sprints, they’re a perfect all-rounder. These disc brake-specific rims offer clean design and aesthetics. Featuring a wide inner width, they pair well with a variety of tires across the full range of drop bar pursuits. As with all rims Whisky makes, these come with tubeless valves and required tape in the box. - Designed to be used with spoke nipple washers - Rider weight limit: 300lbs
Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender
The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button head design, for a flush, clean look. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications - 6mm hex wrench required for installation
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
High quality sealed bearing hub is available in traditional and modern configurations. - Steel axle, aluminum end caps with steel knurled contact surfaces - Same proven driver mechanism as higher priced models - Spoke Interface: J-Bend - Hub/Brake Compatibility: 6-Bolt Disc - Skewer Included: No - Bearing Type: Sealed Cartridge
$659.95 - $999.99 $1,100.00 - $1,400.00 Up to 40% Off
The Roval CLX 32 Tubular wheels are some of the lightest carbon wheels ever made, but this doesn't come at the expense of fundamental performance. Instead, painstaking engineering and lab testing helped them achieve a 490-gram front and 665-gram rear wheel that's tough enough for cyclocross racing, yet light enough for the demands of a GC climber. The low inertia and ample stiffness help the wheel accelerate and change direction on a dime. We didn't skimp on aerodynamic benefits either, despite this wheel's low rim profile. The CLX 32 was engineered in CFD around a 26mm-wide tire shape, and honed in Roval's very own Win Tunnel, in order to be as aerodynamic as some rims almost twice its depth. Meanwhile, Roval aero hubs and CeramicSpeed bearings complete the fast-engaging ensemble. Truly, the CLX 32 ushers in a new era of lightweight performance road wheels.
Equip yourself with the wheel that carried Tony Martin to a World Championship and reach the pinnacle of your own potential. Zipp’s Super-9 Carbon Clincher Disc underwent extensive fluid dynamic modeling, wind-tunnel testing, and relentless refinement so you can enjoy no-holds-barred aero domination. With a variance in width of just a single centimeter from rim to hub, the Super-9 is almost invisible to the wind. Plus the wide rim creates a virtually seamless integration with the tire, increasing aerodynamics and allowing wider tires run at a lower pressure. This diminishes rolling resistance, increases rider comfort, and reduces the chance of pinch flatting.
$599.95 $1,000.00 40% Off
Slice through the wind on Roval's Rapide CLX 40 Wheelset. They feature 40mm-tall aero carbon rims, and DT Swiss Revolution straight-pull spokes laced to sealed ceramic cartridge bearings Roval hubs. The rear hub is adorned with DT Swiss's renowned 240 star ratchet internals. The wide, carbon rim provides a round tire profile and greater lateral stiffness for precise handling. This feathery, 1240-gram wheelset spins up with ease so you can bolt out of corners and breeze up the climbs. With your favorite tubular tires, these wheels roll as smooth as silk.
$565.00 - $776.00
The XM 1501 SPLINE ONE 30: a whole lot of wheel. Fit with high volume tires it will eat up the roughest of descents you can throw at it, and it will climb to those trailheads with ease. Really the perfect size for demanding all mountain riders, it features DT's famous aluminum rim construction, proven on World Cup downhill and EWS levels. The DT Swiss wheel build quality and the unmatched Ratchet System hubs complement this extremely capable package, made to dominate the mountain.
$328.00 - $434.00
Riders known for being hard on their wheels, for not avoiding potholes, and for out sprinting people in full pro kit while on their way to do the groceries should take a close look at the ER 1600 SPLINE 32. A high-end welded alloy rim with a huge cross section laced to wide aero spokes leave you with nothing left to desire. And don't be fooled by the classy looks and a silky smooth Ratchet System hub, because the ER 1600 SPLINE 32 really is all about hard riding and reacting to power coming from the strongest of calves.
$1,350.00 - $1,750.00
Following the success of the 808 NSW, which was ridden to victory at the Pro Men’s Ironman World Championships and the Elite Women’s UCI Team Time Trial World Championships, Zipp is proud to launch their second wheelset in the NSW Series, the Zipp 404 NSW Carbon Clincher. Zipp's advanced development engineers in their top-secret lab, known as The Nest, have delivered a wheelset with improved braking performance, exceptional aerodynamic efficiency, and unparalleled crosswind stability with the most popular and best-selling rim depth. Like the 808 NSW, the 404 NSW also makes use of a Cognition hubset for increased durability and exceptionally low freehub drag. No matter where you ride, the 404 NSW is engineered to make that ride faster. With a rim depth of 58mm, the 404 NSW is designed as a do-everything wheelset that is adept at climbing and maintaining speed on the flats; a wheel strong enough to handle the Spring Classics, but light enough to inspire sprints out of corners. With its advanced aerodynamics, developed using 42 different CFD (Computational Fluid Dynamics) concept studies and months in the wind tunnel, the 404 NSW’s unrivaled crosswind stability saves watts that would have been spent keeping the bike straight, and provides unequivocal confidence for high speed descending. When it comes time to slow for a corner, the NSW-exclusive Showstopper brake track stands ready to deliver the best modulation and shortest stopping distances available, regardless of weather conditions or the length of the descent. Simply put, the 404 NSW represents the cutting-edge of carbon clincher wheel technology delivered straight from The Nest, where Zipp’s advanced development engineers design the world’s fastest wheels.
- Bladed Revolution spokes 2.0/.09x2.3/2.0mm, black surface treatment resists scratches - Cold forging technology, CrNi stainless steel with rolled threads - No hub slotting necessary - 139g (32/265mm) - Box of 20 - Nipples sold separately
$12.50 - $30.00
- Anodized aluminum - 50 nipples per bag - 12mm length
$565.00 - $776.00
With even the EWS race courses getting tougher and tougher and tire manufacturers offering Enduro-strong tires in 2.5-inch sizes, the demand from DT's pros for a wide, Enduro tough wheelset came up and DT responded by developing the EX 1501 SPLINE ONE 30. Often used as a front wheel to generate as much grip where you need it most, it is the wheel for those hunting after the toughest of tracks or those living right in the Alps. Strong, lightweight, and tough as nails, the EX 1501 30 is ready for just about anything.
$394.00 - $526.00
It's a fact: On an E-MTB you run into trail sections much faster than you have ever before considered possible. The H 1700 SPLINE 30 has the power to get you out of such situations as a winner and not face down in the dirt. Steering precision is covered by the strong spokes and the trademark DT Swiss wheel build with high and even spoke tension. The rim can take tires suited for fast riding on rugged terrain and supports them perfectly, even at low pressures. Reliable Ratchet System hubs finally make sure that you can come back and attack those gnarly sections of trail time and time again.
Featuring a lightweight rim and strong bladed spokes, it's a wheel that marries good climbing abilities with a precision ride. This is the idea behind the ER 1600 SPLINE 23: Building a wheel able to perform anywhere, and to perform well. The wide rim and superb Ratchet System hub bring traction and reliability into the mix — it's perfect for riding all year, on all roads, and on mixed terrain.
$539.00 - $750.00
The Enduro incarnation of the SPLINE ONE line-up. Based on a rim that has survived top to bottom runs without a tire under world class riders such as Aaron Gwin, the EX 1501 SPLINE ONE 25 has nothing to prove when it comes to strength. For Enduro racers it comes in handy that it features tech details like the specially developed rim surface hardening process for increased durability at no additional weight. Being built of DT's highest-end components through and through, it should come as no surprise that Jared Graves and Richie Rude have been dominating the EWS on this exact wheelset.
$1,330.00 - $1,843.00
The punchers wheel: The medium-profile aero rim, partly bladed spokes, and lightweight build make it easy to flow with the pack and launch your punchy attack when the time is right. Even in the harshest weather conditions the ARC 1100 DICUT 48 will lead you rapidly to the line. Combining carbon know-how with SWISS SIDEs leading aero knowledge, this wheel epitomizes lightweight and low drag. The aero hub design, featuring straight pull nail-head spokes and SINC ceramic bearings, make it stiff and smooth rolling — just right to surprise the lead-out train.
$1,330.00 - $1,843.00
Aero meets All-around: The ARC 1100 DICUT 62 is ridden by DT athletes in long distance triathlons, as well as in flat stages of the Tour de France. Adding to it's versatility is the Aero+ concept: It is the category leader when it comes to low drag numbers but at the same time it is easy to handle in every wind situation. Hubs equipped with SINC ceramic bearings and ultra-lightweight components throughout are there to make you roll smooth and fast, no matter if you're fighting against the wind on your time trial bike or trying to escape the bunch on the final meters to the line.
- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 222g @ 32h/265mm - Box of 100 - Nipples sold separately
SRAM's Quick Releases hold your wheel tightly in place, are built for ease of use and made to last, too. You get a front and rear quick release.
$20.00 - $21.00
Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place
Touring cyclists have known theses wheels for a decade, noting their durability, simplicity, and ease of service. They're a great choice for all-condition roads.
- Standard skewers fit either 130 or 135mm spaced hubs, unless listed as another length (i.e. 170mm) - 6061 machined lever with stainless steel pivot and laser-etched logo - All shafts are 5mm in diameter
Surly Thru-Axles are low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Offered in several sizes, for both front and rear wheels. 12x142 Rear Thru Axle: - Fits: Midnight Special and MDS Dropout bikes including Instigator, Legacy Karate Monkey & Legacy Krampus. 12x142/148 Rear Thru Axle: - Designed for frames with Surly Gnot Boost spacing (145mm), capable of working with 142 or 148mm rear hubs - Fits: Karate Monkey, Krampus, Troll, Ogre, ECR 12x177 Rear Thru Axle: - Fits: Wednesday 12x197 Rear Thru Axle: - Fits: Ice Cream Truck, Big Fat Dummy 12x100 Front Thru Axle: - Fits: Midnight Special 15x110 Front Thru Axle: - Fits: Karate Monkey, Krampus 15x150 Front Thru Axle: - Fits: Wednesday, Ice Cream Truck, Big Fat Dummy
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 187mm - 1 axle per bag
Authentic replacement freehub body for Ritchey V1 Apex and Zeta road wheels. - Shimano 10/11-speed
Whether the goal is a finish line, epic adventure or simply getting back home again, our new 900 hubs are ready for the challenge. On the inside, our smooth and durable DOUBLE TIME drive mechanism ensures rapid lightning-fast engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Includes Quick Release & 12x142mm Through AxleCaps - Fully convertible with tool free end caps - DOUBLE TIME mechanism offers smooth,quick and durable engagement - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Axle type: Conversion Caps included - Spoke holes: 24 - Brake compatibility: Disc (6-bolt) - Driver Mechanism: Double Time - Four Pawl - Axle material: Tapered aluminum - Driver body material: Aluminum - Hub shell: Aluminum - Seeker angled flanges - Oversized body
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced. Rim brake hubs include quick release end caps and skewer. On all models we spec high-quality made in Japan stainless-steel sealed bearings. Freehub bodies have 28 points of engagement. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity. - Weight: 227g - Drive Side Center To Flange 16.25mm - Non Drive Center To Flange 36.25mm - Non Drive Flange Diameter 41mm - Drive Side Flange Diameter 49mm
Page 1 of 16 Next page