Parts & Accessories

Surly's Dummy Rail Collars are nothing more than a simple clamping device that buttresses the connection between your Big Dummy Frame and the Dummy Rails. They increase the stiffness of the interface of these two parts and help keep your cargo from getting its salad tossed… unless of course your Dummy Bags are filled with tossed salad. These are designed specifically for use with the Big Dummy frame and Dummy rails, and will not work with Xtracycle rails. WARNING: Properly installed Dummy Rail Collars are required for carrying live cargo on your Big Dummy.

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only) - Compatible with luggage carriers from 80 up to 150 mm - -01: carrier plate for rear racks that are not MIK ready. - -02: adapter plate for bicycle rear bags that are not MIK ready - Suitable for e-bikes - Max load: 26lbs/12kg

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

Thule's Pack n' Pedal Side Frames mount quickly and easily to the sides of their Pack 'n Pedal Tour Rack (sold separately). They allow you to use any model of pannier for increased luggage capacity and a lower center of gravity.

Our Seatpost Clamps with rack mounts provide a stable spot to mount your rear rack stays to on bikes without seatstay braze-ons. Very handy. Also great for light mounts, a saddlebag stabilizer, or anything else you problem solving people tend to dream up. Unless you’re thinking about towing a jet ski with it. Let’s be reasonable. Tech Details - Available in 31.8 mm and 34.9 mm diameters - Alloy clamp - Stainless steel bolt - Threaded to accept standard M5 bolts

Omni QuickTrack Adapter attaches to a standard rear rack or Racktime* system platform allowing the use of popular Topeak TrunkBags and rear baskets. Adjustable mounting brackets fit rear rack widths from 90mm to 120mm with 10mm to 12mm rack tube dimensions. - Attachments: Rear rack deck - Material: Engineering grade polymer - Max Load: Limited to rack max loading rating - Size: 32 x 9.4 x 6.1cm - Weight: 230g / 8.11oz Compatibility - Fits rear rack without top plate and spring clip, - Rear rack width 90mm - 120mm, - Rack tubes, 10mm to 12mm diameter - Compatible with Topeak MTX / RX TrunkBags and MTX rear baskets *Racktime is a registered trademark of tubus carrier systems GmbH.

The shoulder strap for your Ultimate Compact, Bike-Box, E-Glow, E-Mate, Velo-Shopper, Trunk-Bag RC or Bike-Tourer is just what you need to carry on once you reach your destination. CONTENT: - 1 shoulder strap with plastic pad

For all models with the QL2 or QL2.1 system. If the standard mounting hooks are too small to fit on the tubes of your bike rack, simply replace the standard hooks with a set of 20-mm ORTLIEB hooks (cannot be used with inserts). DETAILS: - 2 QL2.1 snap hooks (20 mm) with adjustable handle

Metric screws and plastic screws for mounting the upper QL2.1 rail. For all models with the QL2.1 system. CONTENT (FOR ONE PAIR OF BAGS): - 4x metric screws incl. nut washers - 2x self-tapping screws incl. plastic washers

Don't be fooled by its minimalistic design—the SupaStrap locks your gear down tight. The ultra secure design conquers cobblestones, savage trails, and everything in between. - SupaDuty Velcro main strap - TiteLock integrated Velcro lock - Bulletproof YKK buckle

Replacement wire cord for your Handlebar Mounting Set. If the mounting wire for your handlebar adapter is defective, you can find the right spare part here. Contents - 1x wire cord with a length of 105 cm in black

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

Universal shoulder strap for ORTLIEB bags. Includes D-rings, plastic shoulder pad and carabiners. For Bike-Packer and Sport-Packer models from 2009 and for all Back-Roller City, Sport-Roller City and Gravel-Pack models. DETAILS: - 1 shoulder strap with carabiners

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap

Surly Front Rack Hardware

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Extend the life of your Dummy bags with this replaceable wear patch.

If you have unconventional handlebars (sold separately) but still want a bag with easy access when riding then pick up Ortlieb's Extension Mounting Set for the Ultimate5 handlebar bag (sold separately). It pushes the bag out front further than normal so you can still use your fun hand positions and enjoy the convenience of a handlebar bag.

Models with the QL1 system from 2005; Models with the QL2 system. The right hook inserts allow you to securely attach your ORTLIEB pannier with its proven QL1 or QL2 mounting system (16 mm) to virtually any bike rack. - 2 inserts measuring 8 mm - 2 inserts measuring 11 mm

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

The MIK Adapter Plate is an ideal accessory if you want to carry your essential items around quickly and easily. It will unlock your ability to customize your storage options on your rack. It’s compatible with removable bicycle accessories and suitable for luggage carrier racks for the MIK system or MIK carrier plate. The MIK Adapter Plate is a must-have for your Vado, Como, or Tero. - Attaches to a wide variety of accessories, including the Turbo Basket and various Basil accessories. - Connects securely to MIK and MIK HD racks or the MIK carrier plate (not included). - 15kg max. load when used on the MIK HD rack. - Allows for fast and tool-less installation and removal. - Includes MIK stick key for increased security.

Topeak Elementa tool/tube strap provides a minimalist, convenient way to carry your essentials. Individual straps hold tools, Co2 tubes and levers securely. The Elementa Strap can be attached to seat rails, top or down tubes, or anywhere else on the frame. - Attach to saddle rails, seatpost, or downtube with hook and loop fastener - Anti-slip and scratch-free fabric protects your bike

Fast and easy attachment of Topeak handlebar bags. - Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)

Mount struts to your heart's content with Salsa's 8mm Strut Mount kit.

Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes

For all models with the QL2 or QL2.1 system. If the standard mounting hooks are too small to fit on the tubes of your bike rack, simply replace the standard hooks with a set of 18-mm ORTLIEB hooks (cannot be used with inserts). - 2 QL2.1 mounting hooks (18 mm) and adjustable handle

For all models with the QL1 system from 1993. Worn, broken or lost QL1 mounting hooks? No problem! Simply replace the hooks with a new set of QL1 hooks and adjustable handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. - 2 QL1 hooks (16 mm) and adjustable handle - 1 pair each of hook inserts in sizes 8 mm and 11 mm