Filter By:
Parts & Accessories
$25.00
Hydration on the road is critical, and the Direct Mount Reserve Rack helps ensure that you have adequate supplies of H2O or your liquid nutrition of choice right there when you need it. This simple water-storage solution holds up to two water bottles, provides a sleek and aero profile, and mounts easily under any SWAT-compatible saddle.
- Uniquely designed to bolt directly under a saddle with SWAT-compatible mounts.
- Holds up to two water bottles behind the saddle for a more aerodynamic profile.
$99.95
The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.
$102.95
Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
$33.00
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks.
- Offers 20% more water per sip
- Leak-proof cap is easier to open and close
- On/off lever lets you seal your drinking tube shut with one hand
- Hydroguard technology inhibits the growth of bacteria in the reservoir and tube
- Big bite valve self-seals after each drink, eliminating annoying drips
- Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in
$90.00
Enjoy our campout convenient high flow spigot for filling vessels, washing hands or cooking. Hypalon-reinforced hanging points let you hang from a tree or other surface for performance no matter where you are. Compatible with CamelBak filtered by LifeStraw reservoir filter kit for clean drinking water on the go. Even better, the reservoir filter kit has easy collapsibility for simple storage when the party's home for the week. Repurpose Green Sustainability Badge: Made with safer chemicals.
$31.00
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks.
- Offers 20% more water per sip
- Leak-proof cap is easier to open and close
- On/off lever lets you seal your drinking tube shut with one hand
- Hydroguard technology inhibits the growth of bacteria in the reservoir and tube
- Big bite valve self-seals after each drink, eliminating annoying drips
- Dimensions: 30 x 18 x 6 cm/ 12 x 7 x 2.5 in
$18.00
New Crux tube offers 20% more water per sip, and with the insulated thermal sleeve your water stays cooler in warm weather.
$12.00
Keep your reservoir free from taste and odor and ready for your next adventure. Fast-acting tablets are easy to use and work in just 5 minutes.
- Periodic cleaning with CamelBak Cleaning Tabs keeps reservoir and tube free from taste and odor
- CamelBak Cleaning Tabs work in just 5 minutes for a thorough cleaning
- 8 Cleaning Tablets Per Pack.
$11.00 - $12.00
Profile Design bottle cage storage securely and conveniently uses your bottle cage as a cargo carrier. The screw-top, bottle-shaped containers carry necessities—whatever you need along the way.
$44.00
Osprey’s Hydraulics LT 2.5L Reservoir by Hydrapak is made for light and fast activities where weight and balance are critical. Twin-welded chevron baffles stabilize the water and maintain a flat profile. The streamlined design allows for easy loading into internal hydration sleeves. Thoughtful design makes filling, cleaning and most importantly staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.
$12.00
Keep your reservoir funk-free with this cleaning brush kit from CamelBak.
$20.00
Flexible option for fastening additional bottle holder or other accessories to the bike frame.
Are the holes in your bike frame in the wrong place or already in use? Using the O-Strap Bottle Cage Mount, you can additionally attach bottle holders or other items of equipment wherever you want them. This practical accessory is suitable for tubes of up to 60 mm diameter, whether on the frame or other parts of your bike.
$19.95
The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved.
- Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment
- Designed to be easily flipped to provide either left or right hand bottle access
- Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset
- Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes
$44.95
New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.
$7.95
- Perfect finishing touch to a bike built
- 7075-T6 aluminum
- M5 x 15mm
- 4Nm max torque
- For water bottle cages only.
- Never use these aluminum bolts in a structural application.
$6.00
CamelBak's Big Bite Valve Cover keeps your bite valve clean. Put it on your valve for storage or while traveling and your bite valve will stay just the way you left it.
$12.00
Adapter for direct mounting of the Fuel Pack or other equipment with screw connections.
Are you planning to mount the Fuel-Pack or a bottle holder on your bike but find the threaded holes are not in the right place? The Offset-Plate 64 MM gives you a flexible way of adjusting the position of the Fuel-Pack, a bottle holder or other equipment with screw connections.
$79.95
XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
$10.95
XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.
$4.00
Our updated MoFlo cap retains the same mechanism and delivers great flow. It's easier to clean with a flush top and improved grip. The MoFlo valve is easy to open, effortless to use, and 100% leak-proof when closed.
- Flush top for easy cleaning.
- Engineered poppet design provides 100% leak-free performance.
- Valve is soft to the touch and effortless to open and close.
$8.95
Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.
$8.00
The grab-and-go Carry Cap twists to open and fits all Eddy+, Pivot Bottle, Chute Mag, and Hot Cap vessels. Includes one black Carry Cap. Easy to clean and BPA, BPS, and BPF free.
$10.00
Add a Hot Cap to your existing Chute Mag Stainless for an instant upgrade! The leak-proof cap allows 360° drinking from any side and is easy to twist apart and clean. Accessory fits any size of Chute Mag Stainless.
Features:
- 360° Cap: Allows drinking from any side of the bottle
- Leak-Proof Rotating Valve: Twists open for easy sipping and twists apart for easy cleaning
- Fits All Chute Mag Stainless Bottles: For giving your bottle an instant upgrade
- Dishwasher Safe Cap: Cap assembly is top-rack dishwasher safe (hand wash vessel)
$99.95
• AERODYNAMIC LOCATION - Mounts to saddle, hiding in body’s draft
• HIGHLY ADJUSTABLE - Can adjust cage angle and cage height for a perfect custom position
• STABLE DESIGN - Stiffest mount on market with alloy arms
• FLARED CAGE DESIGN - Makes inserting bottle easy
• HIGHEST GRIPPING CAGE - 14 lbs grip on bottle to prevent bottle launches
• ANTI-VIBRATION - Locking hardware for safety and security
• REPAIR STORAGE OPTIONS - Compatible with AERO POUCH 300 BAG or MULTI-STRIKE REPAIR HOLDER (each sold separately)
• Aircraft aluminum mount
• Carbon fiber bottle cage
• Weight: 141.5 grams
Why single rear carriers?
• Replaces frame bottle: Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The DELTAs are mounted on the saddle rails for no measurable drag.
• Refills front drink system: Use the DELTAs to refill a front drink system. Just bring the spare bottle forward from the DELTA and refill. If you have the popular XLAB TORPEDO aerobar mounted system (sold separately), then simply replace the empty front bottle with the spare bottle from the DELTA.
• Adds an extra bottle: These systems are also ideal for longer training rides or century rides, where an extra bottle is necessary so you can have your favorite mix with you at all times.
$11.00
Our improved bite valve design delivers 25% more flow. The universal cap is leak-proof when closed and spill-proof when open, features an easy carry handle, and is compatible with Chute Mag and Hot Cap vessels.
$8.95
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.
$29.95
This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions.
- Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside
- Includes: plastic cage, Allen key, screws and washers
- Fits and encloses up to an average 20oz bottle and has enough room for a heat pack
- Extended zipper pull for easy open close while riding with winter gloves
- Reflective material on logo
$19.99
Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames (right side configuration only). Integrated storage container below the cage with CO2 cartridge holders on both sides of the cage. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame.
- Weight: 94g
Page 1 of 3
Next page