Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Stems

$111.98 - $112.00 $112.00 On Sale
Zipp's Service Course SL Stem provides strength and reliability at just 120 grams. Forged of 7075 aluminum with titanium bolts, the SL is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
$36.99
MSW 25° stems raise the bar—literally—for what riders can expect from an unassuming stem. Available in lengths from 60-110mm for custom fitting. Rigorously tested to ISO-4210 Mountain qualification standards. - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate for easy installation - Bead blasted & anodized black finish
$3.99
The Odyssey stem bolt pack features 6 - 6mm stem bolts that are M8 x 1.25mm thread.
$39.99
The Slab Stem uses a new design with minimal machining keep cost low and strength high. We also added our small brass badge for a unique style. This stem has a cold-forged body and face plate from 6061 aluminum for high strength, and the recessed top face offers a clean look with our fork preload bolt. - Weight: 11.2-ounce - Reach: 50mm - Stack Height: 30mm - Rise: 31mm (Upright) / 2mm Drop (Invert) - Clamp Bolts: 8 x 1.25mm hardened chromoly (x4) - Pinch Bolts: 8 x 1.25mm hardened chromoly (x2)
$49.99
RaceFace's Chester 35 Stem is a practical stem with 2 length options and that legendary bomb-proof Race Face toughness baked right in. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Stack Height: 42mm
$69.99
Aaron Ross' signature Boss v2 stem is a classic top-load, 6-bolt design. Along with other Odyssey v2 stems, the bolt heads have been upgraded to a larger size and the clamping area features unique surface contouring for superior handlebar grip - Special surface contouring and a larger bolt head spec for superior handlebar grip - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter)
$41.00
Developed for longer-travel trail bikes, Promax's S-29 stem offers the perfect configuration to set you up for maximum comfort and control. Featuring an oversize extension tube and faceplate with massive clamping area, it’s sure to keep your bars stylishly in place through the most demanding terrain. These stems are cold-forged and CNC-machined from 6061-T6 aluminum for strength, low weight, and durability.
$109.95
The WCS C220 stem is easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. - The handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar - Bolt forces are aligned with the clamp so that the stem body embraces the handlebar which is less prone to damaging lightweight bars - Clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness
$179.95
You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer: 1-1/8” - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)
$99.95
The new Ritchey WCS Toyon stem takes its lead from the original, award-winning Ritchey C220 stem and gives it a more modern shape and increased stiffness for improved handling and greater responsiveness. The Toyon retains the clamping surface area of the C220, which creates a more secure interface by wrapping a full 220° over the handlebar. Its bolt forces are aligned with the clamp so that the body "embraces" the handlebar—a design which is less prone to damaging lightweight bars and allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. Built from life and all that inspires it, the Toyon builds upon the proven and celebrated C220 design with a fresh, squared aesthetic that adds to the overall harmony of modern frame designs—matching its good looks with enhanced confidence and a more lively feel for wherever your rides take you. - Matching top cap included - 6° of positive or negative rise - 1-1/8" steerer diameter - Stem body wraps 220° around bar clamping area, holding it in place for easy installation - Material: 2014 alloy - Bolts: stainless steel black - Matching top cap included - Angle: 84°/6° - Bar clamp diameter: 31.8mm - Bar clamp width: 44mm - Steerer diameter: 1-1/8" (28.6mm) - Steerer height: 42mm - Weight: 140g (100mm)
$29.95
Precision 3D-Net shaped forged shaft interconnects with a precision broached clamp to create a strong, light, and secure stem offering +/-55 degrees range of adjustment. - Adjustable from +40 to -32 degrees - Stainless bar and stem clamp bolts
$109.95
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
$179.95
You really can have it all-the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Stack: 42mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)
$249.95
When stiffness and weight are the top on your list, you want Ritchey's SuperLogic C-260 Carbon Stem. This revolutionary design starts with a bar clamp that wraps a full 260-degrees around the handlebar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. Ritchey's first full-carbon stem, the C-260 features high-modulus carbon for stellar strength-to-weight ratio that translates into a solid but forgiving ride. And, the steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube, so you can run carbon bars and a carbon steerer with no problem.
$49.95
- C-220 degree extra-wide bar clamp improves stiffness and fits most riser bars - 3D forged 6061 alloy - 42mm steerer height with 41mm faceplate width - 142g (90mm)
$125.00
The Control Stem is tailor-made with a 35mm clamp to partner with the Control SL bar, delivering more stiffness and more control—coming in at an incredibly light 100g (50mm). Turns out, you can have it all. LIGHT: Where light weight and stiffness meet. Its high-quality 7075 Alloy and Ti hardware and featherweight function make the Control SL Stem a perfect match for race-day setups. STIFF: Made with the same integrity as the suite of stiff Roval components, the Control SL provides race-ready rigidity allowing for precision on the bike. FIT: With six lengths to choose from and 6 degrees of rise, you know you'll find your perfect fit. - Material: 3D-forged and CNC-machined, 7075 aluminum - Bolts: Titanium - Length: 50mm, 60mm, 70mm, 80mm, 90mm, 100mm - Rise: 6 degree rise - Weight: 100g (at 50mm), 130g (at 100mm) - Clamp Diameter: 35mm - Clamp Height: 40mm - Steerer Tube: 1-1/8"
$150.00
The S-Works Venge stem has been designed to work as a system with the Venge cockpit to optimize aerodynamics, stiffness, and weight. - Seamless integration with the 2019 Venge frame and hidden cables - Optimized for use with the S-Works Aerofly II handlebars for integration - Its dropped clamp and flat upper profile cheat the wind for the maximum aero advantage - Extremely stiff for responsive handling and out of the saddle sprinting
$60.00
The new Trail stem is forged and CNC-machined to meet the demands of today's trail riding with a sublime stiffness-to-weight ratio. - 3D-forged and CNC-machined 6061 alloy construction - 4-bolt oversized 31.8mm handlebar interface with relieved faceplate - Compatible with carbon composite handlebars
$399.00
A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)
$40.00 - $45.00
Salsa's Guide Stem is lightweight, durable, and provides excellent steering response on the road or trail. - Bead-blasted, then anodized - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation - Stack Height: 40
$39.99 - $40.00
the Pro LT stem is constructed of strong and lightweight anodized 6061 alloy, and features a headlock system for a secure front clamp fixation.
$280.00
A Trail-Rated, carbon-bodied, 31.8mm stem for mountain bikers seeking best-in-class performance, response, and vibration absorption. The M6 stem is designed to complement the look and ride feel of the ENVE M5 and M6 handlebars. - Bar Clamp Diameter (mm): 31.8 mm - Material: Carbon - S.H.I.S. Stem Clamp Diameter: 28.6 - Stem angle: 0-degree
$40.00
Velo Orange Happy Stem. A polished threadless stem with a 45 degree angle to keep your back and wallet happy. - At least 37mm of steerer is required - Does not require a stem cap. Longer compression bolt included - Not compatible with carbon steerer tubes
$10.00
The perfect bling for your bike. Lookin' good = feelin' good. Fits 1 1/8" steer tubes. Ask for more info on current color options
$70.00
Built strong to take on the world's toughest trails, Descendant stems keep you pointed in the right direction. - Bar Clamp Diameter (mm): 31.8 mm - Material: Aluminum - S.H.I.S. Stem Clamp Diameter: 28.6
$120.95
- CNC machined 2014 aluminum body and 7075 aluminum clamps - 240 degree wrap-around, twin plate clamping system - External webbing to maximize structural strength - 118-158g including stainless steel bolts
$54.99
- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates ‘stress risers'
$57.00
Profile's Aris OS stem is a no-nonsense stem made from 6061-aluminum that's been shot peened and anodized for strength and durability. The 4-bolt faceplate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.
$69.99
The pro from down under, Boyd Hilder, is also getting a signature stem in our lineup, and it's well deserved. Boyd likes the familiar design DNA of our stems, but had specific Specs in mind to suit his all-around riding style. Clean looks, comfortable reach/rise, and a palm tree etching so you can take the beach-y vibes with you. - Boyd Hilder Signature - Unique surface contouring for superior handlebar grip - Six bolt clamping configuration - 6061-T6 aluminum, CNC machined
$58.00
Basic, clean, and dependable performance—that's the Gossamer stem. 6061-T6 aluminum is forged and then CNC-machined to achieve the Gossamer's shape. The four-bolt faceplate is cold-forged and holds the bars with authority. Laser-etched graphics are the finishing touch. - 3D-forged and CNC-machined from AL6061/T6 - 4-bolt cold-forged front clamp diameter - Chromoly hardware