Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

Problem Solvers Handlebar Clamp Shim
$9.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
Shimano In-Line Brake Cable Adjuster
$19.99
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
Surly Tuggnut Chain Tensioner
$30.00
If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.
Surly 10/12 Adapter Washer for Solid Axle
$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
Bontrager Blendr Elite Stem Bases
$14.99
Clean up your Bontrager Elite stem cockpit with Blendr Elite bases. Blendr works with this simple formula: Stem + Base + Mount. Add accessory. Key features: - Bases for use with Elite stem - Add any XXX accessory mount for an elegant integrated look
Surly Cable Hanger
$10.00
One of the coolest things about Surly is if they can't find an existing part that fits their standards, they just make one themselves. This cable hanger is made to fit around the oversize bolt on their Constrictor seatpost clamp so you can be sure it will fit around almost any other seatpost clamp bolt too. It comes complete with an adjusting barrel.
Surly Monkey Nuts
$20.00
Whether for derailleur clamp clearance, tire clearance, or personal preference, sometimes it can be advantageous to run the wheel further back in the dropouts. Monkey Nuts install into Surly horizontal dropouts to make spacing the wheel back easy. There are 3 different sets depending on the type of dropout and axle configuration the dropout is intended for. Simply select the correct version of Monkey Nut, install it into the frame, and slam the wheel all the way forward. Bang, done.
Problem Solvers Quick-Release Nut Light Mount
$19.99
The Problem Solvers Quick-Release Nut Light Mount is an ingenious solution when your handlebars are too crowded to accept a light. This fine CNC-machined aluminum post simply screws on in place of your left, front quick-release nut to provide a great place to mount your light. Lower light mounting improves your depth perception and shows more details of the road condition ahead, too.
Surly Constrictor Seatpost Clamp
$15.00
If you're suffering from a slipping seatpost, Surly has the remedy. The Constrictor Seatpost Clamp grabs your post tight and hangs on for dear life. It's machined from anodized aluminum billet, uses an 8mm bolt for ultimate strength, and can accommodate a rear cantilever brake hanger.
Wheels Manufacturing Inc. Chainstay Protector - Wide
$6.95
Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.
RockShox Reverb Stealth Main Piston and Poppet Kit
$49.50
Main Piston and Poppet kit for A2 generation internally routed RockShox Reverb Stealth seatposts. - For "A2" designated posts, 2013-2016: Will not work for A1 posts - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle.
SRAM XX1 Eagle Ceramic Bearing Pulleys and Inner Cage
$88.00
Original equipment ceramic bearing pulleys and inner cage for SRAM XX1 Eagle rear derailleurs.
Problem Solvers MisMatch Adapter 1.2
$24.99
MisMatch 1.2 adaptors allow users to mount a SRAM MatchMaker shifter to a Shimano I-Spec-II brake lever clamp. - Installation hardware included - Anodized black - Sold each
Wheels Manufacturing Inc. Repair Pack for 29mm Spindle Bottom Brackets
$25.95
Replacement spacer pack for Wheels Mfg. 29mm spindle (SRAM DUB) bottom brackets. Bearings sold separately. Pack Includes: - (2) - Silicone Dust Seal, 29mm ID, 42mm OD - (2) - 0.5mm, 29mm ID Crank Spindle Spacer - (2) - 1.0mm, 29mm ID Crank Spindle Spacer
RockShox TwistLoc Full Sprint Remote
$109.00
It’s tough to find space for a remote that looks good and lets the rider maintain full control. Enter TwistLoc: Twist to lock, push the button to unlock. It controls forks, rear shocks, or both simultaneously. With a consistent grip size and light-touch action, TwistLoc maximizes efficiency while keeping your hands safely on the bar. Features - Easy action: Twist to lock, push button to release - Curved "CRVD" and straight "STRT" cable options - Perfect for XC, Trail, and Enduro usage - Fixed grips included
Supacaz Star Capz Anodized
$8.00
An often overlooked, yet critical visual point is the stem cap. We held nothing back creating our stem caps and are proud to offer Star Capz in all your favorite Supacaz colors. Let the star guide you. - 100% anodized aluminum - Laser-etched - Supalite
Wheels Manufacturing Inc. Derailleur Hanger 66
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
RockShox Maxle Ultimate Front Thru-Axle
$65.00
The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru axle system.
Zipp SL Speed DI2 Battery Mount
$11.00
Designed for use with the Zipp SL Speed Seatpost; an internal mount to hold a Shimano DI2 seatpost battery. - Mount compatible only with B1 SL Speed seatpost - Weight: 18g for 27.2mm, 19g for 31.6mm
Wheels Manufacturing Inc. Derailleur Hanger 159
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Screws
Surly O.D. Crank Enduro Bottom Bracket Cups
$65.00
Surly OD Cups - Compatible with 24mm spindles
Surly Chainring Guard
$45.00
Single chainring drive train setups are all the rage these days. With the introduction of exceedingly wide range 10- and 11-speed cassettes, the need for two chainrings has become a thing of the past. But when you only have one chainring, the only thing standing between you and a long walk back to the trailhead is you making sure you don't destroy your one chainring. That's why Surly made a chainring guard to fit O.D. cranks. It is made of aluminum and will take the hit for your chainring. It comes in 5 bolt, 94mm BCD and was designed to protect 22t – 30t rings.
FSA BB30 Inner Snap Ring Set
$5.99
Snap rings are pretty ingenious, except they love to launch in an impossible-to-track direction when removing or installing. Maybe you should keep a spare set of these BB30 Inner Snap Rings, just in case.
FSA Microspacer Headset Spacers
$9.49
- Microspacers ensure the correct fitment of integrated headsets - Use between the top cover and the compression ring to ensure the top cover does not contact the headtube - Sold in bags of 10
Thomson Seatpost Collar
$39.95
Precision CNC machined of light and durable 7000-series aluminum with a fine anodized finish, and 100% made in the USA, Thomson's Seatpost Collar is a beautiful upgrade for your bicycle. It features their bolt, washer and barrel nut combination that allows float on both sides of the collar slot for consistent clamping force. Plus the bolt-hole angle, the collar's 12.7mm inside height and the offset slot, ensure optimum seatpost clamping force at only 25 inch pounds of torque to protect your precious frame and seatpost.
Salsa Lip-Lock
$22.00
Need a non-quick-release seatpost collar with some major bling? Then Salsa's Lip-Locks are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette.
Wheels Manufacturing Inc. Chainstay Protector - 10-Pack
$47.50
Wheels Manufacturing Clear Chainstay Protectors keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Pack of 10
Specialized Custom Snap-On Chainstay Protector
$5.95 - $10.95 $15.00 Up to 60% Off
- Durable custom-molded plastic guard - Co-molded rubber exterior to help quiet chain-slap noise - Easy installation and removal
Specialized Ohlins 8.25-Inch Enduro Light Spring
$46.95 $95.00 51% Off
The new generation spring series features a race-ready weight with big mountain strength. You'll also find advanced technologies that feature a multi-step surface treatment process, as well as cutting-edge heat treatments. Lastly, we use wire materials that allow us to stress the wire harder, without causing damage to the spring, and therefore design lighter springs. - Precise spring rates are broken down to 4 N/mm (23 lbs./in).
Specialized Ohlins 7.75-Inch Stumpy Spring
$46.95 $95.00 51% Off
The Ohlins Stumpjumper Spring sets a new benchmark for spring rate accuracy and light weight for steel springs. - Ultra-fine spring rates to ensure perfect set up for all weights. - Spring rates are broken down to 4 N/mm (23 lbs./in). - Fits Ohlins TTX shock absorber for Stumpjumper FSR only. - Made with proprietary ultra lightweight steel, it's incredible for keeping your build weight down for trail riding.
Ritchey WCS Carbon 1-Bolt Seatpost Clamp
$13.95
Saddle rail clamp outer-pieces to adapt Ritchey WCS Carbon 1-bolt posts to various saddle rail dimensions. - To retrofit WCS 1-Bolt carbon seatpost - Material: 7050 alloy
Wheels Manufacturing Inc. Derailleur Hanger 87
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
KMC Half Link Adapter
$1.65 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Dimension Steerer Extender
$39.99 - $44.99
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer. - Extender clamps to steerer; stem clamps to extender - Adds 2 to 3-1/4-inch height to threadless steerer - Includes top cap and long bolt - 40mm of threadless steerer is required for proper installation - Do not stack steerer extenders; no more than one steerer extender recommended per bike - WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
Shimano Deore XT RD-M786-GS Rear Derailleur Inner Cage Plate
Shimano XT RD-M786-GS Rear Derailleur Inner Cage Plate - "B" fit for XTR RD-M986-GS, Deore RD-M615-GS, RD-M610-GS - OEM inner cage plate for XT RD-M786-GS, SLX RD-M675-GS
Shimano Di2 E-Tube Wire
$26.99
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.
Salsa Lip-Lock Seat Clamp
$22.00
Lip-Locks don’t just secure your seatpost. They do it while looking good! Add a little functional bling to your ride. Available in a variety of sizes and color choices. - Non-quick-release version of the Flip-Lock - Stainless steel pivot and bolt - Black, Silver, Blue, Green, Red, and Pink anodized with laser-etched logo - Black = 28.6, 30.0, 30.6, 32.0, 35.0 and 36.4mm - Silver, Blue, Green, Red, Gold, and Pink = 30.0, 30.6, 32.0 -and 35.0mm - Orange, Purple, and Lime = 30.0, 32.0, and 35.0mm - 34g
Salsa QBP Derailleur Hanger 687 Black
$20.00
Fits: Salsa Colossal Ti 2015, Salsa Warbird 2016, Foundry Overland 2016.
Salsa Frame Plugs
$4.99
Frame Plugs for Internal Cable Routing
Salsa Single Frame Plug for Dropper Routing 5-pack
$4.99
Single Frame Plug for Dropper Routing
FSA MegaExo Self-Extracting Crank Arm Bolt for 24mm Alloy Cranks
This is an FSA MegaExo Crank Arm Bolt for 24mm MegaExo alloy cranks - Designed to fit alloy FSA cranks only - Includes M17 bolt, M27 self-extracting cap, and washers
Greenfield KS3 Kickstand
$9.99 - $10.99
The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
Zipp Bearing Kit: For Front/Rear 77/177 Disc Hubs and Rear 177 Rim Brake Hubs
$41.00
Zipp Speed Weaponry Cartridge Bearings: 6903/61903
Sunlite Safety Lock Seat Clamp
$8.98
• Forged 6061 T6 alloy clamp • Safety lever clamping position follows clamp • Stops the QR lever from catching on things • Black anodized finish
Jagwire Brake or Shift Cable Tips
$3.99 - $39.99
Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.
Wheels Manufacturing Inc. Derailleur Hanger 65
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (Long - Bolt Only)
Problem Solvers Double Chainring Bolts - 8mm
$9.99 - $19.99
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
Problem Solvers Cross Clamp
$30.00
The Problem Solvers Cross Clamp mounts to the seat tube on your frame so that you can make your top-routed shift cables work with a bottom-pull front road derailleurs. This is a common setup on cyclocross bicycles. Choose the diameter that matches your frame.
Problem Solvers Double Chainring Bolts Dual Hex Head - 8mm
$20.65
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of aluminum and feature dual-hex heads for easy, secure installation.
Problem Solvers Braze-On Front Derailleur Adapter
$17.99 - $20.85
The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.
Dimension Heavy Duty Seatpost Clamp
$7.99
Heavy duty bolt-on aluminum seatpost clamp.
Shimano Ultegra 6800 11-Speed Rear Derailleur Pulley Set
$25.98
Shimano Rear Derailleur Pulley Assemblies
Wheels Manufacturing Inc. Carbon Fiber Headset Spacers 1-1/8-inch x 5mm Bag of 5
$10.00
- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes five (5) 1-1/8" x 5mm spacers
Wheels Manufacturing Inc. Ball Bearing Retainer
$4.95 - $17.50
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag
Wheels Manufacturing Inc. 4, 5, 6mm Stainless Steel Fastener Kit
$79.95
- 4, 5, & 6mm stainless steel fastener kit - Includes socket cap screws, flat socket cap screws, flat washers, lockwashers, plain nuts, and locking nuts - 218 Pieces Kit contains: - M4 X 8 Socket Head Cap qty. 8 - M4 X 16 Socket Head Cap qty. 8 - M4 X 8 Flat Socket Head Cap qty. 4 - M5 X 12 Socket Head Cap qty. 12 - M5 X 10 Socket Head Cap qty. 12 - M5 x 8 Socket Head Cap qty. 12 - M5 X 16 Socket Head Cap qty. 8 - M5 X 16 Button Socket Head qty. 16 - M5 X 25 Socket Head Cap qty. 4 - M5 X 8 Flat Socket Head Cap qty. 4 - M5 X 12 Flat Socket Head Cap qty. 8 - M5 X 16 Flat Socket Head Cap qty. 8 - M6 X 20 Socket Head Cap qty. 2 - M6 X 35 Socket Head Cap qty. 2 - M6 X 45 Socket Head Cap qty. 2 - M4 Flat Washer qty. 8 - M5 Hex Nut qty. 20 - M5 Nylock Nut qty. 10 - M5 Flat Washer qty. 20 - M5 Lockwasher qty. 20 - M6 Hex Nut qty. 8 - M6 Nylock Hex Nut qty. 6 - M6 Flat Washer qty. 8 - M6 Lockwasher qty. 8
Wheels Manufacturing Inc. Derailleur Hanger 82
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Problem Solvers Single Chainring Bolts - 6mm
$9.99 - $19.40
The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
Wheels Manufacturing Inc. Derailleur Hanger 287
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x16 socket head screw included
Wolf Tooth Components Set of 5 Chainring Bolts+Nuts For 1x
$29.95
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6 mm long so they work perfectly with any bolt-on single chainring that does not have threaded standoffs. - Design and manufactured in Minneapolis, MN USA - 7-8 NM tightening torque with light grease on threads only - Material - 7075-T6 aluminum - Weight - 5 bolts = 10 grams
Greenfield KS2 Kickstand
$12.99 - $14.99
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - For bikes without factory mounting plate (includes top plate and bolt) - 285mm (for bikes 22" and under) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
Page 1 of 13 Next page