Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Handlebars

Zipp Service Course SL-80 Handlebars
$103.00
Zipp’s Service Course SL-80 bars keep the drops close and within reach, and because they’re angled outwards by 4 degrees, your wrists remain in a strong, natural position. This lets you get low and aero without compromising comfort or control. Zipp left the transition from the tops to the brake hoods flat so you can ride comfortably, even in a more upright position. Stiff and light for uncompromising strength and climbing prowess, these aluminum bars are ready for anything.
Whisky Parts Co. No.7 6F Alloy Drop Bar
$78.00 - $80.00
The No.7 6F is our take on a modern performance drop bar. Sleek, ergonomically designed curves end in a wrist-friendly 6-degree flare at the drops. This gives just enough space to open your chest and provides forearm clearance in the drop position. This modern design offers seamless transitions between positions. The 6F features a slightly deeper drop than our 12F and 24F handlebars. Available in a complete size range so you can dial in your fit.
Wald 872 Handlebar
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable. - Made in the USA - Chrome finish - Weight: 526g - Lever Compatability: Mountain 22.2mm
Velo Orange Tourist Handlebar
$28.00
Velo Orange's Tourist bar is a "North Road" style bar rendered in polished aluminum alloy. It's similar to the bars used on many classic British roadsters. The clamp area is 25.4mm in diameter. The width is 570mm and the reach is 180mm; it has about 70mm of rise. They sweep back about 60-degrees, and the grip area is about 160mm long. The Tourist accepts regular MTB (22.2mm) grips, brakes, and shifters, but not inverse levers or bar-end shifters.
Surly Cheater Bar
$80.00 - $85.00
The Cheater Bar is built from triple butted 4130 CroMoly steel and is tough enough to handle all of the abuse you will inflict upon it on the trail. Surly made two versions: a clear coated raw steel version and a black ED coated version. Both are CroMoly steel. - Material: Cromoly steel - Clamp diameter: 31.8mm - Width: 780mm - Rise: 0mm - Sweep Angle: 11 degrees - Color: Clear Coat Silver and E.D. coated Black - Weight: 400g
Surly Open Bar Handlebar
$55.00
Surly's Open Bar Handlebar is the go-to option for a good time. It features lots of space for grips, shifters, brake levers, or any combination of the a fore mentioned. The swept-back angle is comfortable for your wrists, and the stout chromoly construction is durable yet compliant. It's at home on bike paths or neighborhood cruises, and at an ominous 666mm, it's even wide enough to tackle some singletrack.
Specialized Expert Alloy Shallow Bend Handlebar - Women's
$45.00
Specialized's Expert Alloy Shallow Bend Handlebar offers the same ergonomic benefits as the S-Works version, available in narrower sizes for smaller riders. It delivers a strong and affordable bar with no compromise. •2014 premium butted aluminum, high-strength design •Ergonomic top perch alleviates pressure on hands; smooth transitions for fit & comfort •Shallow bend drop design: 123mm drop x 75mm reach •UCI legal, compatible with Shimano, SRAM, and Campagnolo controls •Front of bar optimized for dual-cable routing •Bar width (center-to-center): 36/38/40cm
Specialized Hover Alloy Handlebars – 15mm Rise plus Flare
$55.00
In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why we designed the Hover Alloy Handlebars to excel on both fronts. Starting with the construction, they're made from our Premium Butted Aluminum for a nice overall weight and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop & bend that's extremely comfortable, while they also have a 15mm rise to help accommodate a wide fit range. For added stability we've added 12 degrees of flare at the drop to give that wide stance. - Constructed from 6061 Butted Aluminum for a high-strength design. - 15mm rise provides a wider range of fit. - Shallow Bend Drop: 103mm drop x 70mm reach x 12d flare
Specialized Hover Expert Alloy Handlebar – 15mm Rise
$55.00
In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why we designed the Hover Expert Alloy Handlebars to excel on both fronts. Starting with the construction, they're made from our Premium Butted Aluminum for a nice overall weight and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop & bend that's extremely comfortable, while they also have a 15mm rise to help accommodate a wide fit range. - 15mm rise for additional rider fit range. - Constructed from 2014 Premium Butted Aluminum for a high-strength design. - Shallow Bend Drop: 123mm drop x 75mm reach
Salsa Cowbell
$55.00
The Salsa Cowbell blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell bars feature a 12° flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops. - Lightweight and strong 6061-T6 aluminum alloy construction - 115mm drop, 68mm reach, 12° flare angle, 12° drop angle - Available in 38, 40, 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 314g (44cm)
Salsa Cowbell 2 Bar
$75.00
Salsa's Cowbell 2 Bar offers a flat transition from bar to lever, therefore increasing comfort. It's made from double-butted 7050 aluminum for sprinting stiffness at a decent weight. The unique feature of this handlebar are the 12-degree flared drops—perfect for cyclocrossers and people who like the extra room to really torque the drops on a sprint or climb.
Roval Alpinist Cockpit
$600.00
Mass is the enemy of performance, so we pulled out all the stops to make the Alpinist Cockpit the lightest one-piece bar/stem combo that passes our standards; at 255 grams (110 mm x 420mm). Not only does light weight make for faster climbing, it also improves acceleration and ride quality. The Alpinist Cockpit's round tube shape and tradition bend respect tried and true forms, but the optimized composite layup and internal cable routing are decidedly modern. Available in 10 sizes, there's one that will fit you perfectly. And because they are backed by a no-fault crash replacement policy and lifetime warranty, you can rest easy knowing that we've got your back. - Bend: Tradition radius ( 125mm Drop / 75mm Reach) - Clamp Diameter: 31.8 - Compatibility: Shimano, SRAM, Campagnolo; Di2 and EPS - Material: Advanced carbon composite - Sizes: 400 mm x 80/90/100mm; 420mm x 90/100/110/120mm; 440mm x 110/120/130mm - Stem Angle (Rise): 6-Degrees - System Weight Limit: 275lbs / 125kg - Weight: 255 grams (110 mm x 420 mm)
Race Face Atlas Riser Handlebar
$79.99
Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep
Profile Design Ultra FR MTB Handlebar
$41.99 - $45.00
Profile's Ultra FR is a tough riser bar that gives you extra control in technical sections and confidence on rough descents. It's made of double-butted 6061-T6 aluminum, which offers superior strength and stiffness and weighs next to nothing.
Pro Discover Medium Flare Handlebar
$60.00 - $64.99
Building on PRO’s knowledge of making elite road and off-road bars comes the DISCOVER range of flared bars to give riders more control in varied off-road situations. - 12 degree flare for optimal riding position - AL-6066 construction for increased rigidity - Shimano DI2 integration - Ergonomic top section for multiple hand positions - The ideal handlebar for long gravel rides
FSA Metropolis Handlebar
$70.99
FSA's Metropolis multi-position handlebar features a stylish wing shape for an ergonomic, flip-flop design at home on your commuter, cruiser, or cafe racer. Set it as a high flyer or low rider to suit your personal and riding styles. - Weight: 300g - Width: 620mm - Backsweep: 46.5­° - Lever Compatability: Mountain 22.2mm - Rise: 32mm
Easton EC70 AX
$214.99
Easton’s new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on rough terrain and long gravel assaults. Why 16-degrees? Based on extensive testing and rider feedback we determined that 16 degrees was the perfect balance of maximum bar flare that still allowed for efficient access and usage of the shifters and brakes in both the hoods and drops. - Width (center-to-center): 40cm, 42cm, 44cm, 46cm (+68m at drops) - Flare: 16-degrees - 42cm: 220g - Clamp diameter: 31.8mm - Reach: 80mm - Drop: 120mm - Materials: EC70 carbon
Easton EC70 AX Handlebar
$214.99
Easton’s new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars, the EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on gnarly terrain and long gravel assaults. - Weight of 42cm bar (grams): 220 - Bar Drop (mm): 80 - Drop Bend Style: Compact - Bar Reach (mm): 120 - Material: Carbon - Bar Top Style: Round
Bontrager Approved 31.8 MTB Bar
$39.99
Follow the trail wherever it leads with the super-strong alloy handlebar designed to stand up to the rigors of variable off-road terrain. The Bontrager Approved 31.8 alloy handlebar is shot-peened for durability and single-butted to save weight. Key features: - Single-butted, tapered-wall, 6061-T6 alloy construction - Shot peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control setup - 40mm of cut marks on each side for easy width customization - Bar end compatible
Answer Products Alumilite Handlebar
$32.00
Answer's Alumilite handlebars provide ample width and rise to fit a 25.4mm stem clamp size. - Weight: 325g - Upsweep: 4° - Backsweep: 8°
Zipp SL-70 Aero Handlebar
$327.00
The SL-70 Aero is a unidirectional carbon handlebar is packed with the innovations for best-in-class fit, ergonomics, and aerodynamic performance. With its wing-shaped bar top, the SL-70 Aero features Zipp's latest bar refinements while building on the trend-setting aero legacy of the VukaSprint. The wing-shaped top was designed using Computational Fluid Dynamics (CFD). The difference of that design is real, saving 6.4 watts over a round-tube section bar top. Beyond aero performance, the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The revised 10° ramp angle to the brake hoods eliminates the need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in drops. - Updated distinctive Zipp cosmetics - 70mm reach and 128mm drop allows for a low and aero drops position - Internal cable routing is easy with Rapid Route - Lifetime warranty
Zipp Service Course 70 Ergo Handlebar
$55.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 Ergo handlebar. The Service Course lineup provides options to match every rider with a high-performance, precise fitting bar. The Service Course 70 Ergo packs a powerful punch of everything you'd want in a bar — a design based on feedback from pro bike fitters and riders, an ergonomic top section, and a price you'll love. - 6061 aluminum for low weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape to better fit the hand - ISO 4210 compliant
Zipp Service Course 70 XPLR Handlebar
$55.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 XPLR, our newest drop-bar offering. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle — from paved roads to gravel, mud, dirt, and even singletrack. The Service Course 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Whether on a two-hour training ride from home or a 200-mile gravel adventure, today's riders demand more of their cockpit: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops while focusing on two crucial metrics — outsweep and flare. - Bar drops provide a wider, balanced, and secure position with drops that are about 6cm wider than the hoods position for technical or intense riding. - The 70 XPLR features an ergonomic top with an extended 100mm clamping area for computer mounts, aero-extensions, bags, and whatever else you may need for the long haul. - Reach: 70mm - Drop: 115mm
Zipp Service Course 80 Ergo Handlebar
$55.00
When it comes to matching style with function, Zipp's stalwart Service Course 80 handlebars now have an option for those who prefer an ergonomic flat top. The Ergo version retains the same 80mm reach and 125mm drop of the existing Service Course 80 bars, with an ergonomic bend for the rider who likes reaching down to, rather than into, the drops. Lightweight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. - New flattened bar top and 3° backsweep for a neutral wrist position on the tops - 7° ramp angle for a flat transition to the hoods and 4° outsweep at the drops - 80mm reach and 125mm drop for a medium-high position - 6061 aluminum for low weight and durability - Di2 RS910 junction compatible - Compatible with clip-on extensions (sold separately)
Zipp Service Course SL-70 Ergo Handlebar
$110.00
The bar offers the same compact reach and drop dimensions as the Service Course SL-70 but adds a flattened top section for a natural ergonomic grip on the bar tops and a revised ramp angle for proper fit. The SL-70 Ergo's specially tuned drop shape creates comfortable hand positions with the short reach to control levers vital for race situations. The bar's 128mm drop help puts the rider low and in control without compromising comfort. Whether it's a rider with smaller hands or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into their optimal position. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape with 3° backsweep for comfort - Clip-on Compatible (40, 42, 44cm sizes only) - Lifetime warranty
Zipp Service Course SL-70 Handlebar
$110.00
The Service Course SL-70 is the bike fitter's go-to bar. The short reach to the hoods allows a proper fit without compromising stem length and steering control. With the revised ramp angle, proper fit is now achievable on even the most challenging setups. The 70mm reach is the shortest of Zipp's Service Course bars. Together with its 128mm drop, the bar is deal for riders preferring a low body position. Whether it's a rider with a shorter torso or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into their optimal position. The SL-70's flattened top provides a better ergonomic fit for the hand and is clip-on compatible. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape with 3° backsweep for comfort - Clip-on Compatible - Lifetime warranty
Zipp Service Course SL-70 XPLR Handlebar
$110.00
This is Zipp's innovative all-road handlebar, the Service Course SL 70 XPLR. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle—from paved roads onto gravel, mud, dirt, and even single track. The Service Course SL 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Today's riders demand a few things out of their cockpit, whether they are doing a two hour training ride from home or a 200 mile gravel adventure: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops, specifically focusing on two crucial metrics: outsweep and flare. Outsweep is created by rotating the drop below the brake perch outward. Flare is created by rotating the entire drop above the brake perch outward. - Distinctive Zipp cosmetics - 70mm Reach and 115mm drop allow a comfortable hoods position and a shallow drops postion - 5° drop Flare and 11° drop outsweep creates a drops position 6cm wider than hoods - Ergonomic top with 3° backsweep - Lifetime warranty
Zipp Service Course SL-80 Ergo Handlebar
$110.00
Zipp Service Course SL 80 Ergo handlebar is all about making you faster in style and comfort. The bar offers an 80mm reach and 125mm drop, perfect for a rider looking for a medium reach and shallow drop who likes reaching down to, rather than into, the drops. This bar has a flattened top and 3° backsweep for a neutral wrist position on the tops. The bars feature a 7° ramp angle for a flat transition to the hoods and a 4° outsweep at the drops. In addition to the ergonomic benefits, the Service Course SL 80 Ergo is our first ergo bar to be clip-on compatible. Made of 7050 aluminum, the Service Course SL 80 Ergo weighs 275g for a 42cm-wide bar. Light weight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 80mm reach and 125mm drop for a medium-high position - Flattened top shape with 3° backsweep for comfort - Clip-on Compatible (40, 42, 44cm sizes only) - Di2 RS910 junction compatible - Lifetime warranty
Zipp Service Course SL-80 Handlebar
$110.00
The Service Course SL-80 provides comfortable and efficient positions on the bar tops, brake hoods, or down in the drops. The bar allows a neutral wrist position on the drops and a flat brake-hood transition. This minimizes the need for up-rotated bars. Drops are angled outward by 4 degrees, reducing wrist strain. Named after its 80mm reach to bring the hoods and control levers back where you want them. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. The SL-80's rounded bar top is clip-on compatible. Forged from lightweight 7075 aluminum. - Distinctive Zipp cosmetics - 7050 Aluminum - 80mm reach/125mm drop designed to fit a large number of riders - Clip-on compatible - Lifetime warranty
Zipp Vuka Aero
$900.00
Zipp’s Vuka Aero redefines aero handlebar conventions while being compatible with modern-day aero bikes. The current redesigned Vuka Aero builds on the technological foundation of aero excellence set by the original version. Vuka Aero is an integrated aero bar that features market-leading adjustability; it can be used with any stem to help you find your ideal position on the bike. The airfoil used in the Vuka Aero is based on the shape of the SL-70 Aero road bar. The result is an aero bar that’s stiff and streamlined while maintaining the UCI’s 3:1 aspect ratio requirement. - Market-leading adjustability in pad fore-aft, width, height, and angle - Integrated Carbon Aerobar works with any 31.8mm clamp stem - Integrated SRAM eTap AXS Blip box mount in the Center Cap - Rapid Routing cable exits are positioned for easy installation of brake cables - Vuka Aero ships with base bar, extension clamp, and armrest clamp - Extensions sold separately
Page 1 of 6 Next page