Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Fenders

$24.99
Keep water and mud at bay with SKS's Dashblade fender! It's light and easy to install and remove thanks to its quick-release strap that fits a wide variety of seatposts and seat tubes.
$62.95
The Topeak DeFender TX is a compact trekking bike fender set. Adjustable aluminum struts with QR levers for quick, perfect alignment and good tire coverage. The DeFender TX set is made of high impact plastic and the highly polished underside prevents dirt buildup. Fits tires up to 700 x 44c. - Brake bolt and fork eyelets attachment (front) Seat tube and seatstay or chainstay eyelets attachment - Injected high impact resistant plastic with aluminum struts - Adjustable angle and position for perfect tire coverage - 56.8 x 13.7 x 8.4 cm /22.4” x 5.4” x 3.3” (Front); 77. 8 x 26. 5 x 8.6 cm /30.6” x 10.4” x 3.4” (Rear) - Weight: 192 grams (Front); 245 grams (Rear)
$74.99
Turn your mountain bike into an all-weather vehicle with Planet Bike's Cascadia Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
$37.99
The X-Guard is a universal downtube fender for any wheel size. It is attached using two straps on the lower bar (downtube), making it compatible with fat bikes and bicycles with oversized tires for all-around mud protection. It also protects E-MTB batteries from dirt, splashes and flying rocks. The straps are extra long and can be shortened as needed, making X-Guard suitable for any frame shape and all common battery models.
$12.99
- Guards against mud - Made from 100% recycled plastic waste - 100% recyclable - Supplied with 4 zip ties - Made in England
$89.99 - $114.99
Turn your bike into an all-weather vehicle with Planet Bike's Cascadia ALX Fenders. Made of unbreakable corrosion-resistant 6061 aluminum with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection plus release tabs on the front fender for easy on/off. The hardware's even pre-installed for quick mounting.
$12.99
Planet Bike's Grunge Board is an easy-to-mount front fender that keeps you dry and clean when it's wet and muddy. It's made from a nearly indestructible polymer and it mounts in seconds to your down tube with the 2 rubber straps.
$8.00
- Contains 2 Mudflaps and Quick-Snap attachments - Compatible with: ATB Hardcore and SpeedEZ fenders (sold separately) - For use with 60mm width fenders (sold separately)
$44.99
Planet Bike's SpeedEZ Fenders keep you dry in wet weather and are easily removed when the sun comes out. Made from nearly indestructible Superflex polycarbonate and rustproof stainless-steel stays, these fenders also utilize a clever, pre-installed attachment system so you can mount and remove them in seconds.
$69.00
Made of durable polycarbonate and featuring the highest quality hardware of any fenders in their class, Portland Design Works' Poncho Fenders keep you safe from spray from head to toe. They use thick 6mm stays for extra rigidity, sturdy rubber mudflaps for extra coverage, and front safety release tabs to ensure your wheels keep turning even if debris gets lodged between the fender and tire. The Road size Poncho Fenders will fit close clearance road bikes with 700x23 tires maximum or road bikes designed to take fenders with up to 700x25 tires. They are designed to fit under caliper brakes and forks, and include add-on mounts for bikes that lack eyelets. - 30 mm wide to fit 700x23 tires maximum - Pre-installed stays and brackets for faster mounting - Weight: 454 g (16 oz) - Lifetime PDWarranty The City size Poncho Fenders are designed for touring and CX bikes with 700x35 tires maximum. They come with all necessary hardware to mount to bikes with brazed on eyelets. - 45 mm wide to fit 700x35 tires maximum - Pre-installed stays and brackets for faster mounting - Weight: 567 g (20 oz) - City size installation manual (PDF) - Lifetime PDWarranty
$24.99
SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.
$4.00
Compatible with: - Hardcore bike fenders - 700c x 45mm - Full bike fenders - 700c x 45mm - SpeedEZ bike fenders - 700c x 45mm - Hardcore Recumbent bike fender - 700c rear - Contains 45mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers
$24.99
You only need a couple of seconds to protect yourself and your bike from wet weather. The Clip-On Fenders are made of a durable all-weather polymer so never again will you arrive at work with a rain streak up your back again. And because they're clip-ons, you can easily remove the fenders on sunny days.
$74.99
Turn your big-wheeled bike into an all-weather vehicle with the Cascadia 29er Fenders. Made of unbreakable polycarbonate with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
$24.95
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 26-inch bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.
$74.99
The ultimate clip-on mudguard set for road bikes for tire widths up to 25mm. Its smart, double-hinged quick release fitting system also fits aero forks and is also compatible with disc brakes, direct mount brakes, and thru axles. Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. The superlight extra long mud flaps give additional spray protection. In addition to using the quick release rubber straps it can also be fixed in place with zip ties. Paintwork protection film for the frame is also included. Disc brake compatible: Please be mindful of the brake wire.
$38.99
The Velo 65 Mountain 29 is an ideal front and rear fender retro fit kit for 29" mountain bikes. Its practical universal mount makes it easy to securely attach to a wide range of bikes. The included U-stay kit provides fender stability. Suitable for tire widths up to 2.35". - Features a safety release on the stay mount
$68.99
The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support. - Compatible only with disc brakes - Includes hook-and-loop fasteners and tension rubber
$68.99
The ultimate set of mudguards for fat tire bikes offering all-round mud protection. Front is mounted easily under the down tube by high-performance straps and the rear fits to the seat post in seconds with the proven tool-free SKS quick-release Powerstrap attachment system. The two-hinge arm in the rear allows perfect adjustability to the geometry of your bike.
$65.98
The ultimate clip-on mudguard set for road and cyclocross bikes for tire widths between 25 and 32mm. Its smart, double-hinged quick release fitting system also fits aero forks and is also compatible with disc brakes, direct mount brakes, and thru axles. Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Its superlight extra long mud flaps give additional spray protection. In addition to using the quick release rubber straps it can also be fixed in place with zip ties. Includes adhesive protection kit to avoid damaging the paintwork. Disc brake compatible: Please be mindful of the brake wire.
$18.00
Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10" x 24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability
$76.99 - $79.99
Fender set with flexible spoiler It doesn't get any longer than this: The BLUEMELS STYLE mudguard set with a flexible spoiler offers excellent all-round protection against splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the mudguard is extremely robust, rigid and protected against corrosion. New V adapter with ESC security system With its matt black surface and the black fastening components, the BLUEMELS STYLE also leaves nothing to be desired in terms of looks. The newly developed V-adapter with ESC safety system decouples the double U-struts when branches get between the spokes so that the wheel does not lock. Incl. accessories and struts. - Aluminum/plastic sandwich construction - With a flexible spoiler - V-adapter with ESC safety system - Stable double U-struts - Made in Germany
$24.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it's longer and fatter than the regular X-tra Dry so it works great with 29ers and fatter 700c tires. It's also a breeze to attach with its easy-to-adjust seatpost mounting strap.
$58.99 - $71.99
Fender set made of robust sandwich construction A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion. Stylish driving fun with a safety system The ASR safety system ensures that the struts are decoupled if branches get caught between the spokes so that the wheel does not lock up. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts. - Aluminum/plastic sandwich construction - V-struts with fixed bridges for flexible adjustment - ASR safety system - Bottom bracket cutouts - Made in Germany - Tire width in inches: 0.8"-1.1" - Tire width in mm: 20-28mm - Front mudguard length: 680mm - Rear mudguard length: 1185mm
$30.99
Keep water and mud off you with SKS's Shockboard front fender! It's super light and nearly unbreakable so you know it's ready for off-road action. Plus, it works with most rigid and suspension forks as well as disc and linear-pull brakes.
$43.99
Mudrocker Front Fender for MTB is your perfect trail companion. Provides excellent mud and splash coverage on 27.5, 650b or 29er wheels with a maximum tire width of 3.0" Attaches to fork legs with hook and loop straps. Hook and loop strap fasteners or cable ties can be used to mount the Mudrocker to the fork bridge. If the fork bridge is perforated, the Mudrocker can be securely mounted with the included adapter. Fender can be adapted with scissors if necessary depending on the fork bridge. Perfect companion with the Mudrocker Rear Fender. - Measurements: 490mm - Weight: 112 grams - Compatiblity Notes: Compatible with disc brakes. Not compatible with V-brakes. - Made in Germany
$25.00
These clip-on fenders are designed specifically for fat bikes. They're extra-long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle
$6.95
Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.
$30.99
Keep water and mud off you with SKS's Shockboard front fender! It's super light and nearly unbreakable so you know it's ready for off-road action. Plus, it works with most rigid and suspension forks as well as disc and linear-pull brakes. The XL is ideal for 29ers thanks to 60mm of extra length.
$149.00
Made of sturdy anodized aluminum and adorned with laser graphics, the full Metal fenders are a beautiful complement to any bike with 27.5"/650b or 29" sized wheels and room for extra clearance. The 27.5x2.5" Full Metal Fenders can fit up to 650x56mm or 27.5x2.2" tires maximum. They come with special extra long hangers designed to better fit 650b/27.5" frames and forks. The 29x2.5" (700x65mm) Full Metal Fenders will fit bikes with 29x2.2" tires maximum. They come with special double rear alloy stays that add stability and prevent rattling over larger tire sizes. The double rear stays add stability and prevent rattling. They provide full-wrap coverage, even shielding your shoes and riders on your rear wheel thanks to extra long and super flexible polypropylene mudflaps. Safety release tabs ensure your wheels keep turning even if debris gets lodged between the fender and tire. The Full Metal Fenders easily mount to bikes with eyelets using all stainless steel hardware which may be replaced as needed. Specifications: -65 mm wide to fit 650bx56mm (27.5x2.2) tires maximum -2.5"/65mm mm wide to fit 29 x 2.2" tires maximum -Weight: 730 grams -Lifetime PDWarranty