Filter By:
Power Meters
$483.00
- AXS enabled for easy monitoring and firmware upgrades
- Bluetooth Low Energy and ANT+ compatible
- Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride
- Power balance measures left and right legs separately
- Uses a common CR2032 battery that last for 200 riding hours and changes without tools
- Power-upgrade compatible with the following RED and Force eTap AXS cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48
- Bolt Circle Diameter (BCD): 107 BCD
- Power Meter Type: ANT USB
$645.00
Enjoy the ultimate advantage of freedom and adventure that Eagle provides combined with the Quarq power meter platform that delivers on accuracy and reliability. The SRAM Eagle XX1 power meter is built to pair with the SRAM Eagle drivetrains, providing a significantly quieter performance and extraordinary durability. Take it on the dirtiest, gnarliest trails while maintaining confidence in your cycling components. You came to perform; the Eagle XX1 power meter will perform with you. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather or trail condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh environments do not hold you back, then you need a product capable of rising to the occasion. The Eagle XX1 power meter is designed to be rough-and-tumble tough. Train harder, ride faster and unlock your ultimate potential. The Eagle XX1 power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. The Eagle XX1 also features Bluetooth low energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer.
- Speeds: 11/12
- BB Compatibility: DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP
- Bolt Circle Diameter (BCD): 104 BCD
- Chainline: 52.0mm
- BB Spindle Interface: DUB
- Power Meter Type: ANT+ and BLE
- Crank Arms/Chainrings not included
$429.00
Reach new goals and explore new roads with a power meter that delivers on accuracy, durability, and reliability. The DFour DUB was designed specifically for Dura-Ace R9100 chainrings. Train using a Quarq power meter without changing your drivetrain. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh climates do not hold you back, then you need a product capable of rising to the occasion. That is exactly what the DFour DUB power meter is made for. Train harder, ride faster, and unlock your ultimate potential. The DFour DUB power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. DFour DUB features Bluetooth low energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer.
Features
- Bluetooth low-energy technology and ANT+ wireless data transfer
- MagicZero - automatically checks and recalibrates your power meter as you ride – no need to manually calibrate
- AxCad - no cadence magnet required
- 10K Temperature Compensation
- Battery - CR2032, 200-hour battery life, change without tools
- OmniCal - swap chainrings without affecting accuracy
- 2-year warranty
- IPX7 waterproof rating
- Accuracy - within 1.5%, measuring both legs
$881.00
- AXS enabled for easy monitoring and firmware upgrades
- Fully integrated power meter into a direct mount chainring
- Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride
- Power balance measures left and right legs separately
- SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control
- Laser-etched chainring finish is more durable
- 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks.
- Speeds: 12
- Chainring material: Aluminum
- Power Meter Type: ANT USB
$368.00
Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever.
- An elegant, integrated design
- DUB-PWR spindle-based unit measures left-side power to calculate total watts
- Proven Quarq reliability and accuracy
- Long battery life (400+ hours) to power a season of rides
- User-replaceable lithium AAA battery
- DUB bottom bracket adds durability and simplicity
- Waterproof (IPX7 waterproof to 1 meter for 30 minutes)
- Lightweight (less than 40g heavier than standard crankset)
- Wide chainline crankset for bikes with the widest gravel tires
$368.00
Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever.
- An elegant,integrated design
- DUB-PWR spindle-based unit measures left-side power to calculate total watts
- Proven Quarq reliability and accuracy
- Long battery life (400+ hours) to power a season of rides
- User-replaceable lithium AAA battery
- DUB bottom bracket adds durability and simplicity
- Waterproof (IPX7 waterproof to 1 meter for 30 minutes)
- Lightweight (less than 40g heavier than standard crankset)
- BB not included
$263.00
Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike.
- An elegant, integrated design
- DUB-PWR spindle-based unit measures left-side power to calculate total watts
- Proven Quarq reliability and accuracy
- Long battery life (400+ hours) to power a season of rides
- User-replaceable lithium AAA battery
- DUB bottom bracket adds durability and simplicity
- Waterproof (IPX7 waterproof to 1 meter for 30 minutes)
- Lightweight (less than 40g heavier than standard crankset)
- Simple and affordable power meter upgrade option
- Right Arm/BB/Spider/Chainrings NOT INCLUDED
$585.00
It’s the best of both worlds. A light and stiff direct mount chainring with accurate Quarq power measurement elegantly hidden inside the DUB spindle lets you stealthily gather the data you need to progress. So you can focus your attention on the stunning finish of the carbon fiber crank arm. The wide chainline crankset fits in road and MTB bottom bracket standards so frames can fit wider gravel tires.
FEATURES
- DUB-PWR spindle-based unit measures left side power to calculate total watts
- Proven Quarq reliability and accuracy
- Long battery life (400+ hours) to power a season of rides
- User replaceable AAA lithium battery
- DUB bottom bracket adds durability and simplicity
- Waterproof (IPX7 waterproof to 1 meter for 30 minutes)
- Lightweight (less than 40g heavier than standard crankset)
- Longer DUB crank spindle accommodates both Road and MTB width frame bottom bracket standards for unmatched cross-compatibility across brands
- Compatible with 135mm, 142mm and Boost rear spacing
$220.00
Accurate, reliable power measurement is practically a requirement these days, and the Apex AXS crankarm power meter upgrade is the easiest way to get precise power numbers. With the tech hidden inside the DUB spindle, it fits almost any bike while remaining stealthy.
- DUB-PWR spindle-based unit measures left side power to calculate total watts
- Proven reliability and accuracy
- Long battery life (400+ hours) to power a season of rides
- User replaceable AAA lithium battery
- DUB bottom bracket adds durability and simplicity
- Waterproof (IPX7 waterproof to 1 meter for 30 minutes)
- Lightweight (less than 40g heavier than standard crankset)
$263.00
Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike.
- An elegant, integrated design
- DUB-PWR spindle-based unit measures left-side power to calculate total watts
- Proven Quarq reliability and accuracy
- Long battery life (400+ hours) to power a season of rides
- User-replaceable lithium AAA battery
- DUB bottom bracket adds durability and simplicity
- Waterproof (IPX7 waterproof to 1 meter for 30 minutes)
- Lightweight (less than 40g heavier than standard crankset)
- Simple and affordable power meter upgrade option
- Right Arm/BB/Spider/Chainrings NOT INCLUDED
$800.00
It looks like it’s from the future, but it’s here now. Our lightest, stiffest, and most accurate integrated power meter and chainring combo is now on Force. Quarq D-Zero technology is accurate to +/-1.5% and isn’t affected by temperature changes, and the consistent 13-tooth gap on the rings ensures fast and reliable shifting. Not just unbeatable on performance, our integrated rings are also incredibly long-lasting. And let’s not be modest: the combination of these rings on our iridescent carbon crank arm is the best looking thing out there.
FEATURES
- X-Range gearing technology gives you more range and a smoother gear progression, so you’re always in the right gear
- Power meter is fully integrated into the chainring set for lighter weight
- Power readings are accurate within +/-1.5% and aren’t affected by climate conditions during a ride
- Measures right and left leg power balance
- Unique chainring shape results in a lighter weight, stiffer, more durable crankset
- DUB bottom bracket adds durability and simplicity
$585.00
Our 43/30T chainring combo combined with a wide chainline increases tire clearance while providing ideal gearing for venturing off-road. But gravel riders need power measurement too, so we’ve elegantly integrated Quarq technology into the DUB spindle, stealthily gathering the data you need to progress.
FEATURES
- DUB-PWR spindle-based unit measures left side power to calculate total watts
- Proven Quarq reliability and accuracy
- Long battery life (400+ hours) to power a season of rides
- User replaceable AAA lithium battery
- DUB bottom bracket adds durability and simplicity
- Waterproof (IPX7 waterproof to 1 meter for 30 minutes)
- Lightweight (less than 40g heavier than standard crankset)
- Wide chainline crankset for bikes with up to 700x45c or 27.5x2.1" tire widths (43/30T chainrings only)
- Compatible with all SRAM Road Wide DUB BBs except Ai
$643.00
The XX Eagle T-Type AXS™ Wide left crankarm with Power Meter spindle utilizes SRAM's World stage proven XX crank arm with a subtly integrated power meter to record and deliver live, accurate power readings to your head unit. We achieve this by utilizing what SRAM calls “DUB-PWR” – a unique design that elegantly houses Quarq’s reliable and accurate power measurement inside the DUB crank spindle itself. Measuring left-side power to calculate total watts, it’s subtle, lightweight, compatible with any chainring setup, and boasts unbeatable battery life. It is also compatible with the Flight Attendant system, allowing for total connectivity between all AXS™ enabled components. No-compromise, no-fuss data delivery giving you an edge over the competition.
- Innovative "DUB-PWR" design allows for lightweight, subtle Quarq power integration
- Compatible with RockShox Flight Attendant
- +/-3% accuracy means you'll always know your true watts output
- Long battery life provides 400+ hours of usage
- Waterproof (IPX7 waterproof to 1 meter for 30 minutes
- Right arm, Bottom bracket, Chainring and Spider NOT included
$326.00
The X0 Eagle T-Type AXS™ Wide left crankarm with Power Meter spindle provides riders with accurate, live power data delivery housed in our most advanced aluminum crankset. The power meter technology is integrated through what SRAM calls “DUB-PWR” – a unique design that elegantly houses Quarq’s reliable and accurate power measurement inside the DUB crank spindle itself. Measuring left-side power to calculate total watts, it’s subtle, lightweight, compatible with any chainring setup, and boasts unbeatable battery life. It is also compatible with the Flight Attendant system, allowing for total connectivity between all AXS™ enabled components. No-compromise, no-fuss data delivery with robustness in mind.
- Innovative "DUB-PWR" design allows for lightweight, subtle Quarq power integration
- Compatible with RockShox Flight Attendant
- Unique, groundbreaking design integrated with one of the lightest aluminum cranksets on the market
- +/-3% accuracy means you'll always know your true watts output
- Long battery life provides 400+ hours of usage
- Waterproof (IPX7 waterproof to 1 meter for 30 minutes
- Right arm, Bottom bracket, Chainring and Spider NOT included
$429.00
Reach new goals and explore new roads with a power meter that delivers on accuracy, durability, and reliability. The DFour DUB was designed specifically for Dura-Ace R9100 chainrings. Train using a Quarq power meter without changing your drivetrain. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh climates do not hold you back, then you need a product capable of rising to the occasion. That is exactly what the DFour DUB power meter is made for. Train harder, ride faster, and unlock your ultimate potential. The DFour DUB power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. DFour DUB features Bluetooth low-energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer.
Features
- Bluetooth low-energy technology and ANT+ wireless data transfer
- MagicZero - automatically checks and recalibrates your power meter as you ride – no need to manually calibrate
- AxCad - no cadence magnet required
- 10K Temperature Compensation
- Battery - CR2032, 200-hour battery life, change without tools
- OmniCal - swap chainrings without affecting accuracy
- 2-year warranty
- IPX7 waterproof rating
- Accuracy - within 1.5%, measuring both legs
$340.00
Power measurement is a crucial part of training, so we’ve made it as easy as possible to upgrade your Force AXS ride with Quarq technology. DUB-PWR takes the legendary reliability and accuracy of Quarq technology and inserts it into the crank spindle for clean integration that fits more bikes than ever. It’s invisible technology that adds minimal weight and will help you get to the finish line faster.
FEATURES
- DUB-PWR spindle-based unit measures left side power to calculate total watts
- Proven Quarq reliability and accuracy
- Long battery life (400+ hours) to power a season of rides
- User replaceable AAA lithium battery
- DUB bottom bracket adds durability and simplicity
- Waterproof (IPX7 waterproof to 1 meter for 30 minutes)
- Lightweight (less than 40g heavier than standard crankset)
$1,099.99
Rally RS200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes.
- Advanced Cycling Dynamics—In addition to total power and cadence, Rally RS200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve.
- Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power.
- Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness.
- Power Phase—Get a clear look at where you're producing power in the pedal stroke.
- Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal.
- Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite Shimano SPD-SL cleats in mind.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 320g
- Water resistance: IPX7
- Cleat type: SPD-SL
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RS200 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$585.00
It’s the best of both worlds. A light and stiff direct mount chainring with accurate Quarq power measurement elegantly hidden inside the DUB spindle lets you stealthily gather the data you need to progress. So you can focus your attention on the stunning finish of the carbon fiber crank arm.
FEATURES
- DUB-PWR spindle-based unit measures left side power to calculate total watts
- Long battery life (400+ hours) to power a season of rides
- User replaceable AAA lithium battery
- DUB bottom bracket adds durability and simplicity
- Waterproof (IPX7 waterproof to 1 meter for 30 minutes)
- Lightweight (less than 40g heavier than standard crankset)
- Compatible with 135mm and 142mm rear spacing
$429.00
Reach new goals and explore new roads with a power meter that delivers on accuracy, durability, and reliability. The DFour DUB was designed specifically for Dura-Ace R9100 chainrings. Train using a Quarq power meter without changing your drivetrain. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh climates do not hold you back, then you need a product capable of rising to the occasion. That is exactly what the DFour DUB power meter is made for. Train harder, ride faster, and unlock your ultimate potential. The DFour DUB power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. DFour DUB features Bluetooth low-energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer.
Features
- Bluetooth low-energy technology and ANT+ wireless data transfer
- MagicZero - automatically checks and recalibrates your power meter as you ride – no need to manually calibrate
- AxCad - no cadence magnet required
- 10K Temperature Compensation
- Battery - CR2032, 200-hour battery life, change without tools
- OmniCal - swap chainrings without affecting accuracy
- 2-year warranty
- IPX7 waterproof rating
- Accuracy - within 1.5%, measuring both legs
$1,199.99
Rally XC200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes.
- Advanced Cycling Dynamics—In addition to total power and cadence, Rally XC200 measures much more. These metrics help you identify your strengths and weaknesses, so you can work to improve.
- Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power.
- Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness.
- Power Phase—Get a clear look at where you're producing power in the pedal stroke.
- Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal.
- Cleat Compatibility—For a comfortable ride, these pedals are designed to fit your favorite Shimano SPD cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4)
- Battery life: up to 120 hours (with LR44 battery type)
- Weight: 316g
- Water resistance: IPX7
- Max. rider weight: 105kg
- Accuracy: +/- 1.0%
- Cleat type: Shimano SPD
- Q-factor: 53/55mm with supplied spacing washer
- Stack height: 13.5mm
- Field calibration
- Adjustable release tension
- Garmin Connect
- Measurement location: Spindle
- Communication: ANT+ and Bluetooth
In the Box:
- Rally XC200 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$649.99
Rally RS100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes.
- Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RS100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately).
- Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD-SL cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 328g
- Water resistance: IPX7
- Cleat type: SPD-SL
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RS100 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$368.00
Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever.
- An elegant,integrated design
- DUB-PWR spindle-based unit measures left-side power to calculate total watts
- Proven Quarq reliability and accuracy
- Long battery life (400+ hours) to power a season of rides
- User-replaceable lithium AAA battery
- DUB bottom bracket adds durability and simplicity
- Waterproof (IPX7 waterproof to 1 meter for 30 minutes)
- Lightweight (less than 40g heavier than standard crankset)
- Wide chainline crankset for bikes with up to 700x45c or 27.5x2.1" tire widths (43/30T chainrings only)
- BB not included
$699.99
Rally XC100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes.
- Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally XC100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately).
- Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4)
- Battery life: up to 120 hours (with LR44 battery type)
- Weight: 316g
- Water resistance: IPX7
- Max. rider weight: 105kg
- Accuracy: +/- 1.0%
- Cleat type: Shimano SPD
- Q-factor: 53/55mm with supplied spacing washer
- Stack height: 13.5mm
- Field calibration
- Adjustable release tension
- Garmin Connect
- Measurement location: Spindle
- Communication: ANT+ and Bluetooth
In the Box:
- Rally XC100 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$1,291.00
The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter.
- X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear
- Integrated power measurement
- Power meter is fully integrated into the chainring set for lighter weight
- Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride
- Power balance measures left and right legs separately
- Improved front shifting performance for crisp and accurate front shifts
- Unique chainring shape results in a lighter weight, stiffer, more durable crankset
- Integrated chainring design significantly reduces weight
- DUB bottom bracket adds durability, simplicity and broad compatibility
- Speeds: 12
- BB Compatibility: All SRAM Road DUB BBs
- BB Spindle Interface: DUB
- Chainring material: Aluminum
- Crank arm material: Carbon
- Power Meter Type: ANT+ and BLE
- Bottom bracket not included
$1,099.99
Rally RK200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes.
- Advanced Cycling Dynamics—In addition to total power and cadence, Rally RK200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve.
- Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power.
- Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness.
- Power Phase—Get a clear look at where you're producing power in the pedal stroke.
- Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal.
- Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite LOOK KEO cleats in mind.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 326g
- Water resistance: IPX7
- Cleat type: KEO
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RK200 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$649.99
Rally RK100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes.
- Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RK100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately).
- Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite LOOK KEO cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 334g
- Water resistance: IPX7
- Cleat type: KEO
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RK100 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
Page 1 of 1